HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   still having problems...HELP PLEASE! (https://www.homemadeturbo.com/forced-induction-7/still-having-problems-help-please-6630/)

ONIN 06-25-2003 03:34 PM

still having problems...HELP PLEASE!
 
it seems that no matter what i check or what i do i still have the same DAMN problem.

I can't seem to hold boost under WOT...i can hold boost until redline if I don'go into WOT. but the moment I hit WOT, past 4500 rpm, the booost gauge reads 20Hg (vacuum side) and I lose all of my power.

at first, i thought it was a wastegate problem...so I disconnected the vacuum line that actuates the wastegate...same problem.

i thought it was the BOV but at 8 psi, redline, at 3/4 throttle it still lets off that loud ass PSSSH! so that can't be it

I redid my intercooler connections...as in re-JB welded the seals...thinking that too much boost was leaking at the seals. but now that it has been taken care of, I still have the same problems....

then I went onto a turboprobe forum...i read their posts and one guy described the same problems I was having (except he was losing 4 psi instead of ALL psi....another guy replied by saying that it could be due to some extra backpressure in the exhaust housing causing the wastegate to open...it makes sense to me, only I lose all of my boost...

i don't know if anyone can help, but all ideas, actually, ANY ideas would be appreciated.

thanks,
chris

Turbo90Accord4DR 06-25-2003 05:24 PM

Re:still having problems...HELP PLEASE!
 
so ur saying at WOT past 4500 rpms that ur boost gauge goes from boost to - 20?? i dont even think that its possivle to go -20 unless something is clogging ur intake of ur turbo?? but if its going -20 at WOT someting is getting cloged on the intake somwhere.

aracer69 06-25-2003 06:56 PM

Re:still having problems...HELP PLEASE!
 
you know what i have the same problem-the only thing is that i have like 1 psi of boost only and then it drops to vacuum side-WTF?????? email me at aracer69@hotmail.com if you ever find out cause this is messing with my car too-

Dr.Boost 06-25-2003 07:01 PM

Re:still having problems...HELP PLEASE!
 
WTF? You are getting a vac reading at WOT? Now that is strange. :-\

BTW that BOV might be leaking since you have it disconnected. At full boost the only thing keeping it closed would be the spring which might not be enough.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Todd 06-25-2003 08:13 PM

Re:still having problems...HELP PLEASE!
 
Does the car feel like its going to shut off when it does this? The only way you could get vaccum at wot is if the engine is pulling more air than it can get where the gauge reads.. i would suggest looking at your throttle body and make sure teh blade is not broken. It almost sounds like at wot the throttle is going shut. and 3/4 is actually wot. That all probably makes no sense.. My suggestion is check your TB for wot function (visually look at it while someone hits the gas) Or you have a faulty guage... I vote gauge is the car still runs strong when this happens.

ONIN 06-25-2003 11:49 PM

Re:still having problems...HELP PLEASE!
 
no, i lose all power after after 45000rpm..well, it just feels like stock...no head pinned back feeling at all, thus i am pretty sure the gauge is still good...

dr.boost:

my BOV is still connected...actually everything is connected...I just disconnected the vacuum line from the wastegate to the IM that one time.

but folks, the I intake doesn't feel clogged at all...it pulls really nicely until the engine hits the sweet spot, and the car just dies...I also checked my fhistank check valve and they were in working order...

Dr.Boost 06-26-2003 07:30 PM

Re:still having problems...HELP PLEASE!
 

.I also checked my fhistank check valve and they were in working order...
Try bypassing those and see what happens. How many do you have? Something still sounds funny.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

ONIN 06-26-2003 08:31 PM

Re:still having problems...HELP PLEASE!
 
i have three hooked up.

einh i dunno, maybe it's the fuel...

JD 06-30-2003 01:04 AM

Re:still having problems...HELP PLEASE!
 
definetly has to be a problem with the wastegtate or bov. Or maybe it's a hairline crack in your couplings??? Maybe there is a small crack that only opens when it sees high pressure and then closes back up once you let of the gas. I dont know. Try replacing the wastgate or taking the BOV off. If you take the BOV completely off and it keeps pressure you will know that is the problem. I guess thats about all I could think about. Other than maybe your getting a fuel cutoff at full throttle..


All times are GMT -5. The time now is 09:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands