started my project *pic* FINISHED. . . .BLOWN :-( NEED HELP !!!
 

i just started today, have a lot more of work to do. here are a few pic i took.

---- I FORGOT MY PHONE AT THE SHOP ill post pic tomorrow.

here is what have :

stock d16y7
std manifold
BMC Racing downpipe flange / adapter
1g dsm tdo5h
johnny 6'' budget intercooler
turbo-performance oil lines
racing solutions mandrel benders
y8 intake manifold
ebay greddy s BOV
dsm 450 injectors+resistor
chipped po6 by RevTech

Re: started my project today *pic*
 

Nice i used to have a boosted Y7. Are you located in idaho by any chance? there is a shop called RevTech in boise.

Re: started my project today *pic*
 

yeah, i live in boise. i have some pic of my car on http://www.cardomain.com/ride/2205083

Re: started my project today *pic*
 

Nice to know there is somebody else from Idaho on here. I also live in boise i drive a GSR powered EK coupe with mugen front lip and type r rear lip milano red on silver rims. Its getting boosted soon and No will be tuning it for me. Good luck bro if you need any help or just want to shoot ---- about cars PM me and we will meet up. I also have lots of spare Y7 parts and lots of spare d-series turbo parts.

Re: started my project today *pic*
 

http://i51.photobucket.com/albums/f3...l/DSC00252.jpg

http://i51.photobucket.com/albums/f3...l/DSC00254.jpg

http://i51.photobucket.com/albums/f3...l/DSC00255.jpg

http://i51.photobucket.com/albums/f3...l/DSC00257.jpg

http://i51.photobucket.com/albums/f3...l/DSC00258.jpg

http://i51.photobucket.com/albums/f3...l/DSC00261.jpg

http://i51.photobucket.com/albums/f3...l/DSC00266.jpg

http://i51.photobucket.com/albums/f3...cool/paint.jpg

http://i51.photobucket.com/albums/f3...l/DSC00264.jpg

Re: started my project today *pic* UPDATE
 

Nice looking setup

Re: started my project today *pic*
 

Quote me and use my tags.

Looks like a solid setup, downpipe is hot

Re: started my project today *pic* UPDATE
 

no catch can yet, thets just some red (gay) vacuum / coolent hose i used.

Re: started my project today *pic* UPDATE
 

i have that same stupid light. Its impossable to use. its way to bright and hurts your eyes and if you shine it on anything its to bright to see what your doing. good luck with the project

Re: started my project today *pic* UPDATE
 

what happened to your 11:1 compression, 17psi turbo motor? Nice t25, that will make massive hp in third gear

Re: started my project today *pic* UPDATE
 

???

turbo project *pic*
 

my IM all hooked up

http://i51.photobucket.com/albums/f3...l/DSC00277.jpg

my dad helping out a little

http://i51.photobucket.com/albums/f3...l/DSC00268.jpg

http://i51.photobucket.com/albums/f3...l/DSC00269.jpg

http://i51.photobucket.com/albums/f3...l/DSC00274.jpg

http://i51.photobucket.com/albums/f3...l/DSC00273.jpg

http://i51.photobucket.com/albums/f3...l/DSC00276.jpg

http://i51.photobucket.com/albums/f3...l/DSC00270.jpg

http://i51.photobucket.com/albums/f3...l/DSC00272.jpg

http://i51.photobucket.com/albums/f3...l/DSC00278.jpg

Re: started my project today *pic* UPDATE # 2
 

Lookin good man.

P.S. PB Blaster > WD-40

Re: started my project today *pic* UPDATE # 2
 

The new drop looks much better than the old one. I like those wheels too. Good luck on your project.

Re: started my project today *pic* UPDATE # 2
 

yeah, 620 dollars later. but it dose look A LOT better.

Re: started my project today *pic* UPDATE # 2
 

http://i51.photobucket.com/albums/f3...l/DSC00279.jpg

http://i51.photobucket.com/albums/f3...l/DSC00291.jpg

http://i51.photobucket.com/albums/f3...l/DSC00281.jpg

http://i51.photobucket.com/albums/f3...l/DSC00289.jpg

http://i51.photobucket.com/albums/f3...l/DSC00285.jpg

http://i51.photobucket.com/albums/f3...l/DSC00284.jpg

http://i51.photobucket.com/albums/f3...l/DSC00286.jpg

ALL DONE

http://i51.photobucket.com/albums/f3...l/DSC00290.jpg

ONE HOUR LATER

http://i51.photobucket.com/albums/f3...l/DSC00294.jpg

http://i51.photobucket.com/albums/f3...l/DSC00293.jpg

http://i51.photobucket.com/albums/f3...l/DSC00292.jpg

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

You suck at posting pictures, you need to resize them like how I did in my reply.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

i know, but im retarded

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

Okay so them pictures suck balls but did you blow the motor one hour after boosting it? :D That is a piston or whats left of it in the picture?

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

so wtf happened to it, shitty tune??

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

yeah one hour later, it used to be a piston, lol.

they said we can tune it next friday, i was like ---- that give me a base map, so that i can drive it. so yeah just a shitty base map. ill take it out tomorrow to see how bad it is.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

You didnt boost or anything and your motor ------- popped?

That sucks balls, LMK how it happenned though

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

Ok here is the story. My first time ever boosting a car. I got everything done yesterday, I started it up on my OBD II just to see if everything is ok. I had some coolant leeks, so I fixed that. Then I went to revtech to get my ECU, they said they can tune it next Friday. So they just put a base map on it and told me not to drive it too hard. My friend came with his integra to check it out, we decided for him to fallow me home in case something happened. So we’re driving and he pulls up next to me and I was like its on bitch. So we go he starts pulling away a little and then I just go right by him ;D next time im it third and he’s in second he leves me cuz of my long ass gears. Last time I start to pull away then it backfired twice and the third thing was the block shuddering. There was wight smoke everywhere we walked back and found the piece in the pic smoking on the road. We were going around 85 when it happened. Ill go to my shop as soon as I get something to eat, to see how bad everything is. Ill post pic later tonight.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

sorry to hear man that suck's! So do you think the base map wasn't tuned properly for even some lite rippers?

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

probably just a really shitty basemap, but all in all setup looks great!

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

anyone know what kind of a base map i should’ve had ?

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

took the engine out today. didnt have time to take it apart, ill do that tomorrow. here are a few pic.

http://i51.photobucket.com/albums/f3...l/DSC00296.jpg

http://i51.photobucket.com/albums/f3...l/DSC00298.jpg

http://i51.photobucket.com/albums/f3...l/DSC00297.jpg

http://i51.photobucket.com/albums/f3...l/DSC00299.jpg

hey Dan you like my pic now ?

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

that's why i always tell my customers to never boost on a basemap. they even told you that. did you even check your timing at idle after putting the basemap in? for all you know it could have been advanced. i'm not saying the shop didn't f#ck up...hopefully they didn't forget to put some timing retard in boost, but you never know when there could be a lean spot in a basemap, which wouldn't be there fault. a basemap is just to be able to drive the car out of boost to get it to the shop for a tune. did you even have 92/93 octane in the tank?

good thing you have a y7. if you look around good enough you can find one for $300 or less...possibly free. good luck on the next one and get it tuned first.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

im not blaming the shop or anything. I was too excited and I fucked up. I have a y8 head and I found a z6 block on ebay, so ill see if I can make it work.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

thats too bad, man. Hopefully you can get it up and get boosting again soon. Its cool that you got your dad to help you with it, my dad is scared to death of my car and refuses to help me or ride in it.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

Same here, at least mine stopped bitiching about all the money I spend on mine. :y Now he kinda asks questions now and then. He picked up my Tial BOV the other night and said "what the hellis this?" ;D

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

i finally took it apart today

http://i51.photobucket.com/albums/f3...l/DSC00300.jpg

http://i51.photobucket.com/albums/f3...l/DSC00301.jpg

http://i51.photobucket.com/albums/f3...l/DSC00302.jpg

http://i51.photobucket.com/albums/f3...l/DSC00304.jpg

http://i51.photobucket.com/albums/f3...l/DSC00305.jpg

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

ouch, thats good stuff right there! :o

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

Damn when you said you blew it i didnt know it was that bad. Do you still need a block?

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

Im guessin yes since that one cylinder is missin a bigassed chunk of wall.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

It's better now... but how'd you know my name? ???

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

OMG... thats badass. Your not a baller untill you blow up your first motor :6 You had to put the dizzy in too advanced, usually basemaps are fatty rich, and the only thing that could do that kind of damage is detonation. Unless your wastegate didnt open.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

hahahaha just looked on the internet, your not mad are you ?

I didn’t do anything with the dizzy, my WG works fine. ill go today to see what kind of a map i had, and look for a new engine too.

ill go and see if i can find a whole engine in nampa for cheap, if not ill give you a call later today.

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

lol .. boost IS like crack




and you O.D.'d i bet your dad was like ... "told ya so"

Re: started my project today *pic* FINISHED / BLOWN :-( lol
 

lol . . . no my dad was like thats what you get when you drive the way you do.

i just got a another complete y7 for $260. ill probably have it in running this weekend.