standard b16a2 pistons size?

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2006 | 08:30 AM

egVTI

Thread Starter

0.0 BAR

Joined: Jul 2006

Posts: 12

standard b16a2 pistons size?

are they 81.00mm?

just so i now when ordering new ones

Jul 9, 2006 | 10:26 AM

Ravage70

3.0 BAR

Joined: Jan 2004

Posts: 5,933

Re: standard b16a2 pistons size?

correct engine building requires oversize so clearances can be correct

Jul 9, 2006 | 11:16 AM

egVTI

Thread Starter

0.0 BAR

Joined: Jul 2006

Posts: 12

Re: standard b16a2 pistons size?

the block is ok that i have so that why i was going to get aftermarket pistons but hte standard size but 9-1 ratio

Jul 9, 2006 | 11:44 AM

Ravage70

3.0 BAR

Joined: Jan 2004

Posts: 5,933

Re: standard b16a2 pistons size?

problem is that when you get the pistons they are all different sizes
if your cheap go std, if u have a few more dollars do it right

Jul 9, 2006 | 12:51 PM

egVTI

Thread Starter

0.0 BAR

Joined: Jul 2006

Posts: 12

Re: standard b16a2 pistons size?

i am not going for standard pistons going to get CP ones just keep the standard bore tho

Jul 9, 2006 | 12:54 PM

90dx

3.0 BAR

Joined: Jul 2004

Posts: 4,027

Re: standard b16a2 pistons size?

Just get a 81.25 and have the cylinders rebored.

Jul 9, 2006 | 12:57 PM

ghettoturbo

Guest

Posts: n/a

Re: standard b16a2 pistons size?

Quote:

Originally Posted by egVTI

i am not going for standard pistons going to get CP ones just keep the standard bore tho

he was talking about clearances being different when using aftermarket pistons, some people(but not all) go with an overbore to get the right piston to wall clearance

Jul 9, 2006 | 08:39 PM

egVTI

Thread Starter

0.0 BAR

Joined: Jul 2006

Posts: 12

Re: standard b16a2 pistons size?

so wots the easiest way to do this i have neva bult a motor up b4 i was gonna order al parts i need then get it done at end of summer

so wot size of pstion to order? wot a reasonable CR ?