sciff5

with 7-9psi I should be able to go 600+ whp with torque to match. Should be decently quick in a 2500-2600lb car

ghettoturbo

wait wait....an ls1/rx7 budget build? Go scrounge around until you find the right bends to do a proper setup. Why half-*** something so simple on such a badass car/engine

the 13th round

yeah, just buy some mild steel bends from racing solutions.

wire feed, looks good and cheap as ----.

Hellbert

45 bucks for some ---- that seals marginal at best if u decide to stuff an intercooler up front ull need atleast 4 pieces of this thats 200 bucks after shipping. the only way to make this ---- seal is a stainless band clamp and then they still leak. that pic they have of it on ebay is as tight of a bend as itll ever make so theres another problem. if ur tryin to get out cheap buy one of those kits that has the silicone and clamps already in it on ebay. silicone is your friend look at ***** for instance.

TurboGuy

Just do the ---- right so its not always in the back of your mind. It usually always will come back to bite you in the *** when you put your *** on the line.

seerex

Post pic's of your car/ location.

enikolayev

i used it before to connect dp to exhaust, hit a bump and dinged the flex, then it burnt through shortly after. It is rubbish, just get a real flex.

RYANARBOR

------- halarious but not always true....in the case of ***** i mean,silicone couplers are **** if that makes sense.