Stainless Steel Exhaust Flex Tubing
Anyone used this stuff?
http://store.airflo.com/ss3.html http://cgi.ebay.com/ebaymotors/FLEX-...4951QQtcZphoto I am looking to do a custom turbo kit or run a procharger in my ls1 rx7 Would like some flexible tubing to use as intercooler piping, then I wouldent need a bunch of bends and bunch of silicone couplers, Just one coupler at the turbo and one at the FMIC, one at the other side of the IC and then one at the TB. This stuff looks perfect, its even SS so it shouldent rust. The only thing is I dont know how thick the stuff is or how flexible it is. It looks plenty flexible but if its not sturdy enough and I try tightening a t-bolt clamp on it I dont want it to crush down killing the seal between the flex tubing and the silicone coupler. Let me know what you guys think. I am too embarrased to ask these questions on the Ls1 forums, but I'm obviously doing a budget build and I know you guys will understand that. |
Re: Stainless Steel Exhaust Flex Tubing
Junk.
|
Re: Stainless Steel Exhaust Flex Tubing
do a little searching in the archives and it has been used before O0
not sure how well it will hold up to your application though if nothing else when it blows you can use it as a jig for a solid IC piping route |
Re: Stainless Steel Exhaust Flex Tubing
|
Re: Stainless Steel Exhaust Flex Tubing
i considered it but i never did get any of it. i dont know i still might ;D
|
Re: Stainless Steel Exhaust Flex Tubing
Originally Posted by 1slow91HF
do a little searching in the archives and it has been used before O0
not sure how well it will hold up to your application though if nothing else when it blows you can use it as a jig for a solid IC piping route In my application I'll be running initially only about 7lbs of boost, prob a lot less than most people on here. Malichite I am curious as to how that flex tubing is holding up around the tbolt clamps if its strong enough to really crank those suckers down on it. Anyone else using it and if not, why? CrxVtec why is it junk? I see guys on here using PVC pipe.. I would think that stuff is junk |
Re: Stainless Steel Exhaust Flex Tubing
Just emailed the company selling the stuff and asked him for thickness of he material used and he said its about twice as thick as the cheap stuff. He said its about .04" (which I believe equates to about 18ga) and the double thick stuff is about .09" thick. He said he mainly sells it as exhaust tubing for trucks and that it meets ODOT state of Ohio truck specs (whatever that meens)
He claims its air and water tight. I might have to test that claim out. Thinking about buying a section of this stuff in 3" diameter and taking a section of it and pressure testing it with a bike pump. |
Re: Stainless Steel Exhaust Flex Tubing
Originally Posted by sciff5
Search and the site in general seem to be running really slow.. maybe high server load right now, dont know.
In my application I'll be running initially only about 7lbs of boost, prob a lot less than most people on here. Malichite I am curious as to how that flex tubing is holding up around the tbolt clamps if its strong enough to really crank those suckers down on it. Anyone else using it and if not, why? CrxVtec why is it junk? I see guys on here using PVC pipe.. I would think that stuff is junk |
Re: Stainless Steel Exhaust Flex Tubing
Originally Posted by crxvtec91
I have seen people use that stuff, and it leak boost. I ran pvc for almost a year, super cheap and strong never leak a bit. If I had to do it again on the cheap I would run the pvc again.
|
Re: Stainless Steel Exhaust Flex Tubing
if your only running 7 psi i doubt you will have a very badass car where you will notice the difference in the flow from the ribs
|
Re: Stainless Steel Exhaust Flex Tubing
Originally Posted by txdohczc
if your only running 7 psi i doubt you will have a very badass car where you will notice the difference in the flow from the ribs
|
Re: Stainless Steel Exhaust Flex Tubing
wait wait....an ls1/rx7 budget build? Go scrounge around until you find the right bends to do a proper setup. Why half-ass something so simple on such a badass car/engine
|
Re: Stainless Steel Exhaust Flex Tubing
yeah, just buy some mild steel bends from racing solutions.
wire feed, looks good and cheap as ----. |
Re: Stainless Steel Exhaust Flex Tubing
45 bucks for some ---- that seals marginal at best if u decide to stuff an intercooler up front ull need atleast 4 pieces of this thats 200 bucks after shipping. the only way to make this ---- seal is a stainless band clamp and then they still leak. that pic they have of it on ebay is as tight of a bend as itll ever make so theres another problem. if ur tryin to get out cheap buy one of those kits that has the silicone and clamps already in it on ebay. silicone is your friend look at boobs for instance.
|
Re: Stainless Steel Exhaust Flex Tubing
Just do the ---- right so its not always in the back of your mind. It usually always will come back to bite you in the ass when you put your ass on the line.
|
Re: Stainless Steel Exhaust Flex Tubing
Post pic's of your car/ location.
|
Re: Stainless Steel Exhaust Flex Tubing
i used it before to connect dp to exhaust, hit a bump and dinged the flex, then it burnt through shortly after. It is rubbish, just get a real flex.
|
Re: Stainless Steel Exhaust Flex Tubing
silicone is your friend look at boobs for instance |
All times are GMT -5. The time now is 04:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands