SSAC wastegates>??????
 

how do yall like the ssautochrome wastegates, i have heard some good things about there wastegates cant say the same for the turbos but how do yall like them. and also do the wastegates come with the dump tubes?


what happens if the wastegate fails and im running an MBC? will it still spike and kill me or will the mbc save me some how

Re: SSAC wastegates>??????
 

It won't save you. MBC retards opening of wastegate. But in case wastegate is not operating nothing stops turbo spinning to heaven.

Re: SSAC wastegates>??????
 

thanks for clearing that up. so what about the ssac w/g's are they any good?

Re: SSAC wastegates>??????
 

There is very few problems with them if any.The catch is if it does fail it could cost you a engine etc.I have never had a issue with one and will continue to use them.When you recieve it open it and inspect the diaphram etc and re tighten everything to double check it as Chinese quality control isnt the best.

Re: SSAC wastegates>??????
 

Boost cut is a must with the SSAC.

Re: SSAC wastegates>??????
 

Beware of the ssac wastegates!!!!! the one I had the valve inside came loose from the little alan key bolts and was flopping around in the wastgate housing, thank god for the valve seat.

Re: SSAC wastegates>??????
 

Ive use the 35mm and made 302/262 @ 13lbs and it help perfect no spike or creep
anyone here using the larger ssac WG's?
i was thinking about getting the 46mm but couldnt find anyone using them

Re: SSAC wastegates>??????
 

i've been running mines at 5psi for a month no prblems yet... i tightened everything really good first tho...

Re: SSAC wastegates>??????
 

The 46mm??

Re: SSAC wastegates>??????
 

no the 38 i think it came with the mani...

Re: SSAC wastegates>??????
 

inspect the internal before you use it.

Re: SSAC wastegates>??????
 

Mine's working well so far.

Re: SSAC wastegates>??????
 

personally I think they are junk. just invest a little bit more for a real wg. Ive seen some used tials or deltagates running $70-$100 depending on where you look. i mean yeah its cheap for a new one... But why not just pay more and have a piece of mind?!?

Re: SSAC wastegates>??????
 

what wg are you using?

yea but you wont get a larger tial WG (40mm+) for cheap used, and the ssac 35mm work just as good as the tial, so id like to know if the larger knock offs work as well

Re: SSAC wastegates>??????
 

i had first hand experience with the SSAC wg and it broke after 2 days of intensive boosting.

Re: SSAC wastegates>??????
 

What broke?

Re: SSAC wastegates>??????
 

and which gate?

Re: SSAC wastegates>??????
 

My 38 works fine so far. I tested out my boost cut just in case. :P

Re: SSAC wastegates>??????
 

my ssac 38mm works like a champ for the 2 weeks that i have had it..

make sure you check the spring it comes with, i know they come with the wrong springs sometimes.

Re: SSAC wastegates>??????
 

sorta off topic but i bought mine use its a 38mm or maybe a 35mm i need to recheck but anyway it didnt come with a valve seat. Does anyone know if the tial valve seats (fire ring) are the same? Anyone know a fix for this problem?

Re: SSAC wastegates>??????
 

yes there the same

Re: SSAC wastegates>??????
 

my ssac has been working flawlessly for several thousand miles at 12psi

Re: SSAC wastegates>??????
 

solid 8 pi on this setup i just built. i alo had one on ym built d for 15k flawless miles at 16-20 psi.

Attachment 32734

Re: SSAC wastegates>??????
 

Precision fit!

Re: SSAC wastegates>??????
 

What size gates?

Re: SSAC wastegates>??????
 

mine is a 35mm Tial style