SRT-4 TD04LR-16Gk turbo
#21
Re: SRT-4 TD04LR-16Gk turbo
just double checking myself
http://www.srtoys.com/srtu.html
I would either sell it (but I think a manifold and stock turbo is only like $500 from dodge)
Or do like mentioned above and hack it up and weld a t3 flange on to it. But since the inlet for the turbine will be on the opposite side as normal you might have figment issues without making a special manifold.
Later
Randy
http://www.srtoys.com/srtu.html
I would either sell it (but I think a manifold and stock turbo is only like $500 from dodge)
Or do like mentioned above and hack it up and weld a t3 flange on to it. But since the inlet for the turbine will be on the opposite side as normal you might have figment issues without making a special manifold.
Later
Randy
#22
Re: SRT-4 TD04LR-16Gk turbo
same design as a earlier volvo, im pretty sure you could use the tdo4/tdo5 housing from a volvo, shave the t3 volvo flange down and be good
also as far as the turbine spinning the other direction it wouldnt matter because the pressure from the exhaust will still spin the tunbine, just like it would on a normal, both fins are reversed no big deal just *** backwards but will function the same.
cheers.
also as far as the turbine spinning the other direction it wouldnt matter because the pressure from the exhaust will still spin the tunbine, just like it would on a normal, both fins are reversed no big deal just *** backwards but will function the same.
cheers.
#24
Re: SRT-4 TD04LR-16Gk turbo
I'd resell it on the neons.org forums, or ebay. Those guys bolt them on to the N/A earlier neons for a mild setup since it bolts right on. A while back they were worth a 400 or so on there, not sure now since more people will have removed them from their SR-T's. Sell it and use the money to buy something that would work better for your setup.
#25
Re: SRT-4 TD04LR-16Gk turbo
No it will not fit on a tdo5h 14b housing.We tried it.It will not even fit the late model volvo housing.We tried that too after the shaft broke on my friends tdo4hl.He has a srt4 turbo he got for 40 bucks from one of are friends.This was only a week ago,so its still fresh in the memory.
#28
Re: SRT-4 TD04LR-16Gk turbo
Originally Posted by gen4acclude
yes the 14b exhaust housing will fit
1- 14B is a TD05 based turbo, there's quite a differance between TD04 and TD05, like 3/4" between the CHRA and turbine housing
2- It's a TD04R the R means reverse! You can only run it in another TD04R turbing housing. The SRT is the only car that I know of that uses it currently. Same reason you can't use an EVO4+ CHRA and compressor cover with a standard TD05/6 housing and Vice-versa.
basicly sell it to someone with a non-SRT neon and buy something else.
Thread
Thread Starter
Forum
Replies
Last Post
slow90hatch
Turbo Parts For Sale
5
06-20-2007 12:37 AM