Re:Spool Time on a T3 Turbo .60 Intake .48 Exhaust.
 

Well, i took apart my turbo kit and took my turbo to a near by ghetto shop and told them to put a screw on the flange and weld the other section directly to the turbo so now the wastegate sits very firm with no play or dangling

and HOLY ----.. 3200 rpm im at 8psi on teh ihi..
like a champ.. car spins tires in 1st and 2nd and chirps 3rd.. i need to adjust my clutch cable a bit.. seems like its not gripping enuff..

but after driving boosted for 4 months wondering why the lag... now its a whole new world...
T3 time!!

Re:Spool Time on a T3 Turbo .60 Intake .48 Exhaust.
 

btw i will bet that was teh right WG for the turbo, when you rotate/clock the housings the bolts on the WG dont line up on the compressor right and only one bolt will go in and another kinda holds the other side...

Re:Spool Time on a T3 Turbo .60 Intake .48 Exhaust.
 

haha it prolly was rotated.. cuz it points upwards not downwards.

its ok i welded it.. the car ripps now!

Re:Spool Time on a T3 Turbo .60 Intake .48 Exhaust.
 

asm can i buy a copy of your chip off of you? the same thing you are running