Some Newbie Questions With Porn!!!
 

Im planning on installing my HMT kit this weekend if my intercooler piping comes in from racing sloutions.So i have a couple of questions that i havent figured out yet.here is my setup.And some porn!

90 honda crx si
d16y8 (head) minime
hf manifold
14b adapter plate
dsm 450cc
fmic
xenocron basemap

1. I have a crx si with a resistor box.My question is when installing the dsm 450cc injectors do i need to modify the wiring or anything?

2. I need some couplers for my intercooler piping any suggestions? example Can i just use radiator piping to put them together or is there something better i can use around town?

3. I also need to figure out where to connect my vacuum lines from my wastegate and bov.Also does napa have these vacuum lines?


http://us.f13.yahoofs.com/bc/4442441...xd_tFBAEhmyb5e
http://us.f13.yahoofs.com/bc/4442441...xd_tFBLkr14F7h
http://us.f13.yahoofs.com/bc/4442441...xd_tFBeHgGRFje
http://us.f13.yahoofs.com/bc/4442441...xd_tFBxrOOXeNn
http://us.f13.yahoofs.com/bc/4442441...xd_tFB3bPxcB69
http://us.f13.yahoofs.com/bc/4442441...xd_tFBHtZlvZIR

Re: Some Newbie Questions With Porn!!!
 

Re: Some Newbie Questions With Porn!!!
 

damn it.. it worked in the preview let me fix it!

Re: Some Newbie Questions With Porn!!!
 

come on help a new guy out and look at the sweet porn

Re: Some Newbie Questions With Porn!!!
 

Re: Some Newbie Questions With Porn!!!
 

Ok, the porn was a failure, but I'll help you out anyway :P

1. No wiring mods needed to use the dsm 450's on your si.

2. For ghetto cheap couplers try using Home Depot fernco couplers...you can find them in the plumbing section in various sizes and even come with band clamps. Would not suggest running them over 12 psi though, they will start to pop off.

3. You can connect your wastegate line to either a spot on the intake manifold, or to the outlet on the compressor. The bov needs a vacuum source only, so hook it to the intake manifold.