socket for oil feed install
Any one remember what size deep socket is used for the stock sensor, where the oil feed goes to on a d16y8...all i kno is that (1) i dont have a big enuf socket, and my larges is 19mm i believe
|
Re: socket for oil feed install
nvm...found it on h-t
23mm deep socket |
Re: socket for oil feed install
Originally Posted by cberman
nvm...found it on h-t
23mm deep socket |
Re: socket for oil feed install
Vice Grips/Channel Locks pwn all
|
Re: socket for oil feed install
Originally Posted by SloS13
Vice Grips/Channel Locks pwn all
|
Re: socket for oil feed install
i have a socket just for that. 24mm deep socket.
|
Re: socket for oil feed install
Originally Posted by jagojon3
Originally Posted by SloS13
Vice Grips/Channel Locks pwn all
|
Re: socket for oil feed install
Originally Posted by turboDA6
Originally Posted by jagojon3
Originally Posted by SloS13
Vice Grips/Channel Locks pwn all
|
Re: socket for oil feed install
man... on a b series with the oil filter/mount/knock sensor in the way i think ill be stickin to the deep socket. easier then takin a piss without holdin on... man i miss my honda and all of its problems haha
|
Re: socket for oil feed install
24mm open end wrench
|
Re: socket for oil feed install
24mm ratching wrench :)
|
Re: socket for oil feed install
i didnt have enuf space to fit up a 15/16 socket and socket wrench, so i went out and bought just a plain old wrench, and that worked amazingly well
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste? |
Re: socket for oil feed install
Originally Posted by cberman
i didnt have enuf space to fit up a 15/16 socket and socket wrench, so i went out and bought just a plain old wrench, and that worked amazingly well
Now, i have another oil feed question...if i tigheten the turbo fitting all the way down, it faces the flange, thus not allowing me to attach the oil line, is it ok if it is a bit loose, and i use tewflon paste? |
Re: socket for oil feed install
yep
|
All times are GMT -5. The time now is 06:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands