HomemadeTurbo - DIY Turbo Forum

Forced Induction Custom FI Setup Questions

so i picked a snail today (pics inside)

Thread Tools
 
Search this Thread
 
Old Oct 11, 2006 | 08:10 PM
Share
  #1  
Smith-02's Avatar
Smith-02
Thread Starter
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default so i picked a snail today (pics inside)





exh housing says .48, i'm assuming this is a .42/.48, i can't even find a size on the compressor wheel itself. if anyone has a compressor picture send that ---- my way
Reply
Old Oct 11, 2006 | 08:13 PM
Share
  #2  
SpankedYA!'s Avatar
SpankedYA!
0.0 BAR
 
Joined: Mar 2004
Posts: 0
Default Re: so i picked a snail today (pics inside)
Looks like a 42/48 Saab unit.
Reply
Old Oct 11, 2006 | 08:18 PM
Share
  #3  
Smith-02's Avatar
Smith-02
Thread Starter
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: so i picked a snail today (pics inside)
Originally Posted by CSaddict
Looks like a 42/48 Saab unit.
haha, yeah, it's off of a saab. (you sure about the .42?) anyone know what's the bar/psi on the wastegate? or how i can adapt this turbo to use something where i can replace the wg spring as needed?
Reply
Old Oct 11, 2006 | 08:27 PM
Share
  #4  
HMTguy
Guest
 
Posts: n/a
Default Re: so i picked a snail today (pics inside)
Saab turbo. You can't change the wastegate spring without cutting it open, but you can use an MBC just fine.
Reply
Old Oct 11, 2006 | 08:29 PM
Share
  #5  
Smith-02's Avatar
Smith-02
Thread Starter
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: so i picked a snail today (pics inside)
Originally Posted by jagojon3
Saab turbo. You can't change the wastegate spring without cutting it open, but you can use an MBC just fine.
does anyone know what the stock spring rate is i need to know
Reply
Old Oct 11, 2006 | 08:40 PM
Share
  #6  
HMTguy
Guest
 
Posts: n/a
Default Re: so i picked a snail today (pics inside)
It's not in our stock wg setting database, I would take a guess and say around 7 psi though. But maybe that's just the beer talking.
Reply
Old Oct 11, 2006 | 08:43 PM
Share
  #7  
ifly87's Avatar
ifly87
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Re: so i picked a snail today (pics inside)
Originally Posted by c0mpl3x
does anyone know what the stock spring rate is i need to know
Thats not important, just take it off and call it good.
Reply
Old Oct 11, 2006 | 08:47 PM
Share
  #8  
Smith-02's Avatar
Smith-02
Thread Starter
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: so i picked a snail today (pics inside)
Originally Posted by jagojon3
It's not in our stock wg setting database, I would take a guess and say around 7 psi though. But maybe that's just the beer talking.
speaking of beer, i found around 23 cans worth in a car beside the saab i got the turbo from. pabst blue ribbon
Reply
Old Oct 11, 2006 | 08:54 PM
Share
  #9  
SpankedYA!'s Avatar
SpankedYA!
0.0 BAR
 
Joined: Mar 2004
Posts: 0
Default Re: so i picked a snail today (pics inside)
My Saab turbo's internal only was good for about 5-6 lbs. I used an MBC to make it a more respectable 11.
Reply
Old Oct 11, 2006 | 08:55 PM
Share
  #10  
Smith-02's Avatar
Smith-02
Thread Starter
0.0 BAR
 
Joined: Apr 2006
Posts: 0
Default Re: so i picked a snail today (pics inside)
Originally Posted by CSaddict
My Saab turbo's internal only was good for about 5-6 lbs. I used an MBC to make it a more respectable 11.
this is going on my toyota, it should be a good start. i can always adjust the pre-load on the wg flapper, it's kinda like a turnbuckle for adjustment
Reply



Advanced Search

All times are GMT -5. The time now is 06:39 PM.