Saab 9-3 turbo question.........exhaust housing swap?
06-29-2006, 11:08 AM
#1
0.0 BAR
Thread Starter
Join Date: Jul 2005
Posts: 12
Saab 9-3 turbo question.........exhaust housing swap?
The turbo I am going to use is in good shape. Its off a 9-3 Saab. I believe it is a T3.
I am getting it back this afternoon so I will take pics and show you guys what I mean.
Heres the thing. The exhaust housing is different than one I have seen before, the outlet looks like a ball and socket type thing. It has three studs and is about 2.5 inches in the center. For grins and giggles I fitted a 2.5 3 bolt exhaust flange to it and I could use that and some mandrel bends to fab a DP.
But.
I would like a cleaner look. Can I swap a exhaust housing from another Saab 9-3 to it and use that with a pre fabbed DP with the T3 flange?
Wrap it in heat wrap and it would look alot cleaner than any crap I could make.
TIA
Chris
I am getting it back this afternoon so I will take pics and show you guys what I mean.
Heres the thing. The exhaust housing is different than one I have seen before, the outlet looks like a ball and socket type thing. It has three studs and is about 2.5 inches in the center. For grins and giggles I fitted a 2.5 3 bolt exhaust flange to it and I could use that and some mandrel bends to fab a DP.
But.
I would like a cleaner look. Can I swap a exhaust housing from another Saab 9-3 to it and use that with a pre fabbed DP with the T3 flange?
Wrap it in heat wrap and it would look alot cleaner than any crap I could make.
TIA
Chris
Thread
Thread Starter
Forum
Replies
Last Post
X_Josh411_X
Wanted
2
04-19-2006 03:31 PM
krskid
Wanted
6
08-02-2004 08:18 PM
