Running race fuel through a wastegate a BAD Idea????
My new Tial 38mm external wastegate just arrived today and I noticed that right on the box it says
**ATTENTION**: Regarding standard WG38mm valves. These valves are not intended for leaded fuel use. You may request a racing valve that is intended for leaded fuel use. There is an additional charge for this racing valve. Extended use of leaded fuel will cause performance problems. I was going to just run 93 oct through it for the street but also tune it to higher PSI for track use with leaded 110 oct race gas for the added power from boost and timing. Do you guy's still run leaded race through your's or do you heed the warning?? thanks |
Re: Running race fuel through a wastegate a BAD Idea????
they make unleaded racegas ::)
use it or make your own, xylene owns ;D |
Re: Running race fuel through a wastegate a BAD Idea????
I never had a problem with leaded gas. It says 'extended use' which I guess is kind of up to your own descrection to define that.
Every day hundreds of people use leaded gas through their TIAL's |
Re: Running race fuel through a wastegate a BAD Idea????
if you use it only on track days i dont think thats "extended use"
|
Re: Running race fuel through a wastegate a BAD Idea????
my 44m tial i just bought says its for both leaded and unleaded fuels.
|
Re: Running race fuel through a wastegate a BAD Idea????
gaysex, unless you just purchased a new wastegate for the B16 then it's a SSAUTO knock off wastegate.....? and in any case, I'd have to agree that just a night at the track shouldn't hurt anything.
|
Re: Running race fuel through a wastegate a BAD Idea????
ugh, i never ran the ssauto.
i dynoed with a 38mm REAL tial, and its too small, my 44mm REAL TIAL is on the way. thanks for coming this is the one i bought http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT |
Re: Running race fuel through a wastegate a BAD Idea????
Originally Posted by hotrex
setup is as follows,
7.9:1 comp .10 over b16a devconed block, srp pistons eagle rods, stock head. .63ar gt35r ssac 40mm wg hotrex custom "party girl" manifold precision 780s xoxo racing dual trumpeter bov, sounds knarly, seriously. 2.5 inch charge pipes, AsIaN PeRsUaTiOn 29x9x3 bar and rice intercooler 3 inch stainless dp with flex 3 inch half exhaust, ( pipe with resonator cut off behind seats) turbohf style plx m300 turbosmart 2 stg boost controller tuned by chris ( xenocron) on crome pro |
Re: Running race fuel through a wastegate a BAD Idea????
Originally Posted by BoosTedZSix
:S
|
Re: Running race fuel through a wastegate a BAD Idea????
i have been using the same tial 38mm gate for over 2 years, and have had no issues, on race or pump, i did not ask for anything different
|
All times are GMT -5. The time now is 10:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands