HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Rods & fuel pump (https://www.homemadeturbo.com/forced-induction-7/rods-fuel-pump-3765/)

VTCPWR 04-12-2003 10:20 PM

Rods & fuel pump
 
Hey, I have a 92 JDM EG8 civic which comes with the JDM 1500 SOHC VTEC engine (d15b - 130hp)

My civic is in the process of the turbo conversion (using IHI VF10 turbo, custom manifold, 500mm x 300mm custom intercooler, 2 extra 420cc injectors, & link engine management).

Im planning on running my car at 7 psi on standard internals.

Anyone have any objections to this amount of boost on this engine? Will the rods hold up?

Will the standard fuel pump be Ok?

I know these JDM engines arnt common but any help would be appreciated.

shortyz 04-13-2003 04:13 AM

Re:Rods & fuel pump
 
yes the motor will be fine providing u have some sort of decent tuning like zdyne or custom boost chips.

VTCPWR 04-13-2003 09:16 PM

Re:Rods & fuel pump
 
Ok, Do you have any links to these tuning devices?

Im using a 'intercept link' which fools the map sensor to allow boost http://link-electro.co.nz/ancillary_devices.html
Im also using an extra injector controller which will be dyno tuned - http://link-electro.co.nz/powerlink.html

Is this similar to zdyne or custom boost chips?

Thanks.

VTCPWR 04-14-2003 12:30 AM

Re:Rods & fuel pump
 
Any help would be appreciated.

HMT-Admin 04-14-2003 04:17 PM

Re:Rods & fuel pump
 
That setup will be just fine.. Might take a little bit to tune it, but other than that, you should be just fine.

That turbolink looks similar to the EIC setup
http://www.sdsefi.com/eic.html

Jeff

VTCPWR 04-16-2003 02:09 AM

Re:Rods & fuel pump
 
Sweet, Thanks for that. My car is being dyno tuned tomorow morning and I get it back tomorow night (provided nothing goes wrong :-X).
I'l post up my numbers & how it goes.

VTCPWR 04-19-2003 08:12 PM

Re:Rods & fuel pump
 
Civic is running but still needs a bit more tuning.
Its first run on the dyno it reached 105KW @ the wheels @ 6psi. Not the best power but my car would have struggled to make 60KW @ the wheels while N/A + Its nice and reliable for daily driving :)

Semnos 04-20-2003 10:12 AM

Re:Rods & fuel pump
 
That seems low.
That engine is rated at 130 hp at the flywheels. that would be 97KW

VTCPWR 08-21-2003 07:44 PM

Re:Rods & fuel pump
 
Sorry to bring this thread back from the dead, but I want to compare factory power rating to my current reading.
How do i convert power at the fly wheel to power at the wheels?

Thanks.

scttydb411 08-22-2003 12:09 AM

Re:Rods & fuel pump
 
you lose something like 15-20% through the drive line.


All times are GMT -5. The time now is 05:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands