retarding timing
which way does my distibutor go to retard it forward or backward? and how much do i need to move it for 7PSI?
i have a b16a2 , the distibutor is left of the engine |
Re:retarding timing
blarble
|
Re:retarding timing
turn towards the front of the car to retard, and towards the firewall to advance.
also wen moving the distributor: if the idle goes up, you are advancing it. If the idle goes down then it is retarding it. |
Re:retarding timing
what should i put it too for 7PSI
|
Re:retarding timing
can i just move it all the way towards the front?
|
Re:retarding timing
uhh i have no idea how many degrees that will put you at...
get a timing light. |
Re:retarding timing
Are you running an AFC? Otherwise I can't see why you would want to retard it that much. ??? You will also need to jump the two wires under the dash or the ecu will not retard the timing. Jump the wires, turn the car on, loosen the distributor, turn it clockwise to retard it, tighten the distributor, turn the car off, un-jump the wires. Turn car on and go.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:retarding timing
retard it 1 degree 2 max...
|
Re:retarding timing
can i just use the gun, what is this jumping wires your talking about?
|
Re:retarding timing
Have you ever checked a cel(check engine light) on your car before? You jump those wires together. They are near the ecu on the passenger side. They should have a blue/green(sorry I'm color blind) wrap on them. There should be two connectors. One has two wires and the other has three. You need to use the one that has two.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
All times are GMT -5. The time now is 06:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands