HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Rebuilt turbo has up and down play (https://www.homemadeturbo.com/forced-induction-7/rebuilt-turbo-has-up-down-play-100210/)

seerex 03-04-2009 09:35 AM

Re: Rebuilt turbo has up and down play
 

Originally Posted by b20beast83
thanks everyone

i wondering if i should balance the turbo

Ahh did you even mark to kinda put it back in balance? Do you happend to know how fast a turbo spins?

b20beast83 03-04-2009 09:55 AM

Re: Rebuilt turbo has up and down play
 
yes i marked
but i dropped the compressor wheel and it has a small nick

turbos spin like 200 000rpms right?

lock-pop! 03-04-2009 12:16 PM

Re: Rebuilt turbo has up and down play
 
fail


/thread

90dx 03-04-2009 04:20 PM

Re: Rebuilt turbo has up and down play
 
Up and down is fine as there is play until the turbo has oil and is spinning.As long as there is no in and out your good.

b20beast83 03-04-2009 06:25 PM

Re: Rebuilt turbo has up and down play
 

Originally Posted by 90dx
Up and down is fine as there is play until the turbo has oil and is spinning.As long as there is no in and out your good.

i am confused
i thought in and out was thrust / up and down

Smith-02 03-04-2009 06:48 PM

Re: Rebuilt turbo has up and down play
 
in/out is thrist, side to side is bearings, generally.

b20beast83 03-04-2009 06:54 PM

Re: Rebuilt turbo has up and down play
 
let me see if i got this right
in and out is shaft play right
and up and down is thrust play?

Smith-02 03-04-2009 06:57 PM

Re: Rebuilt turbo has up and down play
 
ITS ALL SHAFT PLAY for fucks sake.


martirw 03-07-2009 05:45 PM

and its all bad

Tacos 03-07-2009 09:29 PM

Cause im not going to read this thread anymore...

Rebuilt turbos, even NIB turbos can have shaft play. It is more normal then most think(this thread proves it). Put it on the car, let it cycle some oil in there and the play should be less noticed if not gone. The shaft and the bearings can not be so tight as to where there is no movement, if that was the case youd just feed shavings from your turbo to the engine.


All times are GMT -5. The time now is 04:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands