Rebuilt turbo has up and down play
I rebuilt my turbo, new bearings ect.
The turbo still has up and down play. Whats up? What is the cause and what do i check |
Re: Rebuilt turbo has up and down play
up and down play? wtf is your turbo an enlobal bearing?
|
Re: Rebuilt turbo has up and down play
Originally Posted by b20beast83
I rebuilt my turbo, new bearings ect.
The turbo still has up and down play. Whats up? What is the cause and what do i check |
Re: Rebuilt turbo has up and down play
Originally Posted by crxvtec91
Was it a rebuild kit off ebay? BTW a old turbo is like a old motor you must check to see if you are going to need bigger bearings.
how do i tell if i need oversized bearings up and down play - thrust play |
Re: Rebuilt turbo has up and down play
Originally Posted by b20beast83
got it from gpopshop
how do i tell if i need oversized bearings up and down play - thrust play |
Re: Rebuilt turbo has up and down play
i dont know?
|
Re: Rebuilt turbo has up and down play
it will be fine after oil gets to it
|
Re: Rebuilt turbo has up and down play
Originally Posted by apexsilver06mr
it will be fine after oil gets to it
:( |
Re: Rebuilt turbo has up and down play
Originally Posted by b20beast83
i tried to put oil... same thing
:( And like they were saying parts wear down a bit over time and you may need oversized bearings to make up for the loss. You can put factory seals and bearings in and still have play. |
Re: Rebuilt turbo has up and down play
thanks everyone
i wondering if i should balance the turbo |
Re: Rebuilt turbo has up and down play
Originally Posted by b20beast83
thanks everyone
i wondering if i should balance the turbo |
Re: Rebuilt turbo has up and down play
yes i marked
but i dropped the compressor wheel and it has a small nick turbos spin like 200 000rpms right? |
Re: Rebuilt turbo has up and down play
fail
/thread |
Re: Rebuilt turbo has up and down play
Up and down is fine as there is play until the turbo has oil and is spinning.As long as there is no in and out your good.
|
Re: Rebuilt turbo has up and down play
Originally Posted by 90dx
Up and down is fine as there is play until the turbo has oil and is spinning.As long as there is no in and out your good.
i thought in and out was thrust / up and down |
Re: Rebuilt turbo has up and down play
in/out is thrist, side to side is bearings, generally.
|
Re: Rebuilt turbo has up and down play
let me see if i got this right
in and out is shaft play right and up and down is thrust play? |
Re: Rebuilt turbo has up and down play
ITS ALL SHAFT PLAY for fucks sake.
|
and its all bad
|
Cause im not going to read this thread anymore...
Rebuilt turbos, even NIB turbos can have shaft play. It is more normal then most think(this thread proves it). Put it on the car, let it cycle some oil in there and the play should be less noticed if not gone. The shaft and the bearings can not be so tight as to where there is no movement, if that was the case youd just feed shavings from your turbo to the engine. |
Originally Posted by martirw
(Post 1259698)
and its all bad
|
All times are GMT -5. The time now is 02:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands