Rebuilding my T3, with pics *Update*
Got a new center section for my smoking T3 assuming the seals were bad. (Thanks Dr Boost ;)) Took my turbo off in 30 degree weather. I don't want to hear about it's 0 degrees in Canada and that's cold. I had to work in my rock driveway in 30 degrees and that was cold enough for me. It started hailing too >:( Man, bolts can be a bitch when it's real cold out. Took the turbo apart, is the center section bad? I don't freaking no. Popped the new one in by the time I was done it was dark out. We'll find out tommorow how it worked out.
New center section http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg Old center section http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg Back together http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
Re:Rebuilding my T3, with pics
how did you take it apart? did you take both wheels off and slid it out?
|
Re:Rebuilding my T3, with pics
Just unbolt both housings and they pop right off, 6 bolts on each side I think. It was real easy, I just hope I did it right, assuming there is a wrong way.
|
Re:Rebuilding my T3, with pics
it'll work. the only bad thing that can happen is if it wasn't on tight enough. did you use a seal for the compressor housing? if you don't have one. silicone or gasket maker glue will work.
|
Re:Rebuilding my T3, with pics
I think I'll toss some RTV in between for the comp housing, what do I torque these bolts to anyway?
|
Re:Rebuilding my T3, with pics
the best idea is to get spare gaskets before doing the job
|
Re:Rebuilding my T3, with pics
I too would like to know what torque you should tighten the bolts to. Particularly, the nut the holds the compressor wheel on.
|
Re:Rebuilding my T3, with pics
where you get center section and how much?
|
Re:Rebuilding my T3, with pics
My torque was measured by hand, we'll say 25 ft lbs or so.. ;) I got it from Dr Boost for $90.
|
Re:Rebuilding my T3, with pics
Got the thing back together, 22 degrees out :D My battery is dead so I have to wait on jumper cables. Thing hasnt been started in 2 weeks because I left it at home when it started smoking bad. Don't want to pop start it since the turbo needs primed. Here are some pics, what do you think of the return?
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
Re:Rebuilding my T3, with pics
Return looks about as good as it gets. :)
Let us know how is goes. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Rebuilding my T3, with pics
what to center sections normally run not bought off HMT. are they usually new or just rebuilt and balanced.
|
Re:Rebuilding my T3, with pics *Update*
Got jumper cables, primed the turbo, started it up, ripped it around, no smoke. Life is good 8)
|
Re:Rebuilding my T3, with pics *Update*
now get to my house saturday and lemme ripzor it
|
Re:Rebuilding my T3, with pics *Update*
nice good to see it's finnaly fixed.....smoke screens are kinda fun though :P
|
Re:Rebuilding my T3, with pics *Update*
Originally Posted by hotrex
now get to my house saturday and lemme ripzor it
|
Re:Rebuilding my T3, with pics *Update*
all the alky you can drizzle son
|
All times are GMT -5. The time now is 04:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands