Question on injector seals/ pics inside
 

https://www.homemadeturbo.com/tech_p...seal-kit_P.jpg

ok, i think i know 3/4 the seals go..

the BIG green one is the one you bore out and where the injector goes into the manifold

the GREEN o-ring small one is the one on fuel rail side

the taller BLACK one is for the injector seat onto the fuel rail

but what is the smaller BLACK one for?

Also, i just bought my 450cc 2g dsm injectors, I know i will need the 2 green seals, but is it necessary to get the taller "black" seal to sit on the rail or can i use the DSM ones or should i use my stock ones or buy new ones?

Thanks for your help! ;D

Re:Question on injector seals/ pics inside
 

I used stock ones. Roughed with them for a bit and they fit fine.

Re:Question on injector seals/ pics inside
 

the black ones are for stock 240cc inj. the length of the inj body to tip is different from dsm 450cc and honda 240cc. that is why you should use the green seal. it's just a little taller and allows the pintile to sit in the manifold about the same as the stock.

Re:Question on injector seals/ pics inside
 

so do i still need the 2 black seals or not? the dsm injector comes with the "taller" black seal on the fuel rail end already.. do i replace that one?

Re:Question on injector seals/ pics inside
 

???

also which part # is the green seals at honda or is it acura?

Re:Question on injector seals/ pics inside
 

dremel out your stockers it works mint i did it it took 5 mins maybe less

Re:Question on injector seals/ pics inside
 

I found out why there is a difference with the green one and the little black one. Both of them are seals for injectors but Honda made different seals for certain cars (the injector port seat is deeper than some). For instance, I pulled apart a stock civic SI intake and it was using the small black ones, but the d series manifold I have has deeper ports. So instead of making a separate box for each year of car and each model they found it more cost effective to make both them.

Re:Question on injector seals/ pics inside
 

thats' good ----! thanks for the info!

ok now still gotta answer my 2 other questions!!!

1. Do i need to buy the "taller" black seal? THe seal that the fuel rail sits on the injectors?

2. Do i just go to HONDA and say "I want the green injector seal for d16y8 " etc?

Re:Question on injector seals/ pics inside
 

1) the green seal works fine for everything
2) go to napa and get the model number off hte box that is in the picture and take it to them. its teh same kit for all the hondas.

Re:Question on injector seals/ pics inside
 

;D