J-SMITH69

looks like its gunna be tt

J-SMITH69

that manifold looks like it was made for tourqe. so maybe that engine isn't meant to be spun to the sky. all tourqe all acceleration

anthony88

the turbo in the picture is a t3 from a 300zx i want two buick grand national turbos does anyone think that will work

14Bn4G

good luck findin' 2 seperate junked GN's....those things are gems

OnYx

do a search on yahoo, i think there is a company that went back into making the GN turbos.

HMT-Admin

First off, that looks like a T-bird/Meurker/SVO turbo, not a Nissan T3 300z turbo. How can you tell? loook at the compressor housing, Fords use the huge inlet that bolts on, and the 2 bolt discharge off the compressor. Depending on what size A/R the exhaust side is, those turbos will ------- work GREAT for that setup. To small? josh just be quiet, This turbos are not going to get you 800hp, but, they will more than likly hit 5-600ish in a twin config. Lots of guys on the yahoo blow-through group use these turbos on TT V8's they are perfect for low-budget setups. let us know how your setup turns out! If you want serious power, I would go with a larger spec T3/T4, or possibly a straight Twin T4 setup.

Jeff

whiterice

Abaz is right, that turbo looks like a T-Bird/XR4TI/SVO turbo. I have 2 in my backyard. They have a 60/63 a/r and are perfect for a V8. In that pic, it looks like the exhaust is going straight into the control arm. not much room under the header for an exhaust pipe. Anyway, where there's a will...

turbocivic17m

My friend has a GN turbo but I'm sure he is not willing to part with it....He's had it laying around his house since the early 90's I think

anthony88

im gonna rig up a homemade fuel injection system from junkyard v8s