Projects of 2008
#1
Projects of 2008
So I'm kind of new the forum, finally registered after two years of lurking around... and well 2008 for me is going to be a crazy year for building my ---- up...
Project #1 Begin restoration of my Mazda 323 GTX (1.6L DOHC Turbo, 4-wheel drive)
Project #2 Begin my long dreamed of turbo Escort setup
project #3 Begin Supercharging my VR6 in my bora...
So the question I have for you guyz is this, what forced induction related project do you plan on starting, or finishing in 2008?
Project #1 Begin restoration of my Mazda 323 GTX (1.6L DOHC Turbo, 4-wheel drive)
Project #2 Begin my long dreamed of turbo Escort setup
project #3 Begin Supercharging my VR6 in my bora...
So the question I have for you guyz is this, what forced induction related project do you plan on starting, or finishing in 2008?
#2
Re: Projects of 2008
picked up a 89 hatch for 3 bills....looking to turbo the stock dpfi setup as i've never run a turbo setup off only 2 injectors....then swapping a mini me worked over and going for that 300hp mark while rockin the D.
#4
Re: Projects of 2008
Integra 91,
t3 precision turbo
eagle rod
forged piston
450cc
full crower built ls head
port and polish
xenocron 255 fuel pump
ported skunk2 intake manifold
tial wastegate
cdm bov
mini ram horn manifold
Still missing piping, interfooler, pison and rod, oil line (the drain supposed to be shipped soon) And I don't know if I'll keep the 450cc. For the exhaust, I have a 2.5" catback, but maybe I'll buy a 3", but less ricer than this one. 4" outlet is a bit big :1 But if I don't want to spend more money I'll keep it.
Anyway, when I begin the build I'll start a new thread
t3 precision turbo
eagle rod
forged piston
450cc
full crower built ls head
port and polish
xenocron 255 fuel pump
ported skunk2 intake manifold
tial wastegate
cdm bov
mini ram horn manifold
Still missing piping, interfooler, pison and rod, oil line (the drain supposed to be shipped soon) And I don't know if I'll keep the 450cc. For the exhaust, I have a 2.5" catback, but maybe I'll buy a 3", but less ricer than this one. 4" outlet is a bit big :1 But if I don't want to spend more money I'll keep it.
Anyway, when I begin the build I'll start a new thread
#9
Re: Projects of 2008
1. Strip my crx, do body work, weld the seams up, paint, etc.
2. Swap my built Z6 into the crx
3. Strip my 94 coupe, do body work, weld the seams, paint, etc.
4. Compression test my rusty B7 and put it back into my 94 (reused 14 year old HG, etc)
5. Possibly rebuild my mower for race season.. if I have time/$
2. Swap my built Z6 into the crx
3. Strip my 94 coupe, do body work, weld the seams, paint, etc.
4. Compression test my rusty B7 and put it back into my 94 (reused 14 year old HG, etc)
5. Possibly rebuild my mower for race season.. if I have time/$