project 2.0L gettin started
04-03-2006, 01:09 PM
#1
1.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 254
project 2.0L gettin started
well i decided to break off some of my savings and do another motor build.
heres the progress so far:
new turbo, gt35/40R, ordered a 37R but got this instead
golden eagle 84mm bored OEM P30 headgasket
CP 9.7:1 pistons, Eagle rods, ACL bearings, ARP headstuds
darton sleeved gsR block
all going into this, my 93si hatch
other things include but not shown, supertech valvetrain, clutch and flywheel from LSD, new fluidyne radiator, and a couple other things
going to the machine shop today or tomorrow for the boring and honing, just waiting on minor nuts and bolts to arrive at acura today to get started
heres the progress so far:
new turbo, gt35/40R, ordered a 37R but got this instead
golden eagle 84mm bored OEM P30 headgasket
CP 9.7:1 pistons, Eagle rods, ACL bearings, ARP headstuds
darton sleeved gsR block
all going into this, my 93si hatch
other things include but not shown, supertech valvetrain, clutch and flywheel from LSD, new fluidyne radiator, and a couple other things
going to the machine shop today or tomorrow for the boring and honing, just waiting on minor nuts and bolts to arrive at acura today to get started
04-03-2006, 11:24 PM
#8
1.0 BAR
Join Date: Oct 2005
Posts: 588
Re: project 2.0L gettin started
Originally Posted by NCHATCH
not trying to get too crazy, i just have some goals that have to be met, its been to long to get there
In retrospec I wouldn't have rushesd my build as much as I had. I thought I was going to do it over spring break, but then I dug into another motor and had to push it back to summer. Looking back I would change so much, but oh well, might as well work with what I have.
I want to see you, and that car, sometime. Hopefully we can set up an HMT-South/Bama meet over the summer.
04-03-2006, 11:56 PM
#9
1.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 254
Re: project 2.0L gettin started
cool, i tried but so many people were busy and set ups not being finished were the main problem. i should be hitting some decent sized races this year, im trying to make it to the NOPI valdosta race but like you said i dont want to rush it.
04-04-2006, 01:17 AM
#10
1.0 BAR
Join Date: Mar 2006
Posts: 234
Re: project 2.0L gettin started
sick setup, take your time, these 2.0l can be a bit tricky. j/k I just pulled my block out and sent it to get honed/bored. i'll be just about at 2.1L. hope to see low 11's high 10's soon. cant wait. keep us posted on how it runs!
