possible twin turbo on 78 chevy truck
i just wanted to know who has down something similar to this obviously i would have to modify some manifolds out of the headers i have and how well would it and would about the old school tuning any help answers and experience definently wanted i am just entertaining the idea for in the future my integra is the first project
by the way its got 8" suspension lift and body lift and 35's and ect and i also had questions about how turbos work on automatics especially on something like this it had the turbo 350 tranny thanks in advance |
Re: possible twin turbo on 78 chevy truck
i didn't read your ----, but nice avatar.
|
Re: possible twin turbo on 78 chevy truck
get some ramhorn manifolds and flip em. weld (2) t3 flanges to them. aftermarket your carb if you haven't already, holley boost or bust is where its at.
|
Re: possible twin turbo on 78 chevy truck
thanks and can u go in a little further dept of this manifold thing
|
Re: possible twin turbo on 78 chevy truck
With fords anyway you can just take the stock tubular headers, flip them over and point up or down in the front, weld T3 flanges on there and mount turbos. Should be a good setup-lots of room in the truck engine bay. Truck probably has cast manifolds so just pick up some headers and mod em.
Erich |
Re: possible twin turbo on 78 chevy truck
http://www.stevensparts.com/images/E...RS/324C25l.JPG
flip this upsidown, weld on a t3 flange or get (2) 2.5" 3-bolt flanges, and weld up a short pipe between them connecting them. internal wg or external, i dunno what youre gonna run |
Re: possible twin turbo on 78 chevy truck
|
Re: possible twin turbo on 78 chevy truck
sweet i didnt really think there would be turbo manifolds that would fit and what about the auto tranny how would that hold up to the turbo
|
Re: possible twin turbo on 78 chevy truck
most domestic auto tranys hold up great to hight hp...
truck tranys are ment to be put under stress so it should take a little boost just fine. |
Re: possible twin turbo on 78 chevy truck
sweet this sounds like its really doable and not to expensive either so could you ghetto rig some sort of single turbo setup or would it just be better to do twin and if so where would you have the pipes meet for the single turbo what location and i have edelbrock carb do you think it would alright good for boost
any help greatly appreciated |
All times are GMT -5. The time now is 09:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands