pistons hitting my head....no not that one!
#1
pistons hitting my head....no not that one!
hey all
got badddd news (well bad for me)
all cylinders are firing but sounds like a piston is hitting the head
spun bearing i think (no...10psi on a non intercooled stock d16 may be the prob...lol).
what do i do next?
should i take the oil pan off and look?
what do i look for?
jman
got badddd news (well bad for me)
all cylinders are firing but sounds like a piston is hitting the head
spun bearing i think (no...10psi on a non intercooled stock d16 may be the prob...lol).
what do i do next?
should i take the oil pan off and look?
what do i look for?
jman
#4
Re:pistons hitting my head....no not that one!
i hear a tapping at start up than can be heard in the car
when i rev, the tap gets louder and faster
thought it was valves....no oil on plugs or in my water
had an overheating prob so i thought i burnt up the valves
help!!!!!!
any other way to check?
i have all my power still
no loss that i can tell
ty
jman
when i rev, the tap gets louder and faster
thought it was valves....no oil on plugs or in my water
had an overheating prob so i thought i burnt up the valves
help!!!!!!
any other way to check?
i have all my power still
no loss that i can tell
ty
jman
#5
Re:pistons hitting my head....no not that one!
that ticking is your rod spinning around the crank
you boost it much its likely to become a permenant fixture int he side of your block; dont boost it you ------- idiot.
drop the pan; check it out; pull the motor and do a full on rebuild; you'll need to turn the crank or buy another one (whichever's cheaper) pick up a new/used rod and probably pistons since you more than likely grenaded the ringlands with 10psi and no intercooler and i seriously doubt its very well tuned so yeah....
your motor is fucked...
you boost it much its likely to become a permenant fixture int he side of your block; dont boost it you ------- idiot.
drop the pan; check it out; pull the motor and do a full on rebuild; you'll need to turn the crank or buy another one (whichever's cheaper) pick up a new/used rod and probably pistons since you more than likely grenaded the ringlands with 10psi and no intercooler and i seriously doubt its very well tuned so yeah....
your motor is fucked...
#6
Re:pistons hitting my head....no not that one!
holy crap man!
why the attitude towards me?
and the cursing?
ive cursed this situation enough on my own!
i do thank you though for showing how to check this out and it sounds like you know whats going on but man...relax on me!
believe me, ive had a bad day
can you tell me maybe where i can find a built bottom end?
ty...
im-taking-my-paxil-now-jman
why the attitude towards me?
and the cursing?
ive cursed this situation enough on my own!
i do thank you though for showing how to check this out and it sounds like you know whats going on but man...relax on me!
believe me, ive had a bad day
can you tell me maybe where i can find a built bottom end?
ty...
im-taking-my-paxil-now-jman
#9
Re:pistons hitting my head....no not that one!
It is the way you're asking your questions that promote these "attitude" toward you.
Nobody will hand you a built bottem end.
There is no way you can tell what's going on without tearing up the motor.
And stop the exessive use of the Return key.
Nobody will hand you a built bottem end.
There is no way you can tell what's going on without tearing up the motor.
And stop the exessive use of the Return key.