|
Re: Piston to wall clearance (vitara)
just to add to the discussion: thoughts on a daily driven vitara setup in NY? it get pretty darn cold around here and stays that way for a while. im wondering if it would be too much cold - rattle time for a daily driven setup.
|
Re: Piston to wall clearance (vitara)
i just measured the top compression ring end gap (with an old ring, dont know if that will make much of a difference) and its larger than .024" which is hondas service limit and what my feeler gauge reads up to. Does anyone know where to get file fit rings or gapless rings for a d series? I looked for hours already.
|
Re: Piston to wall clearance (vitara)
Originally Posted by fast2camciv
they are fine...mine measured the same...and i think we all know how well they worked for me :P
but yea they do sound like a deisel truck warming up but once they are hot they sound like any other forged piston...i had a friend with cp's in his car and they sound identical...you couldnt tell who had what pistons in there car from the sound of the idle..... i had the head off one time and there was some slight scarring on the walls but nothing i could feel with my finger nail...and that was with about 7k miles on the build...we were very concerned with the piston to wall clearance as well but i think its only an issue on cold start up. the vitaras seem to expand nicely and fill the gap. |
Re: Piston to wall clearance (vitara)
Originally Posted by turbo4life
hey man i got the same problem my machine shop is boring the block but they are askin me wat the piston the cylinder wall clearance is so just tell them .003" ? right because i wanna get this baby put together faster ive been with out my turbo civic since 6/24/06 thats the day my motor blew!! i cant wait to go back to boost.. so tell me if that will work.. tahnks for any tips man..
-Jason |
Re: Piston to wall clearance (vitara)
My clearanced out to like .0035" and they rattled and I put like 35K on the motor and no problems. :8
|
Re: Piston to wall clearance (vitara)
thats good to hear if it works for you 35k miles is that normal reap everyday..? well thats great to hear.. but im boring cuz i got the oversize pistons so i shouldent bore any more to get the .003 suzuki cleanace cuz d sleeewes are weak and sohcpwr is telling im gonna blow my motor any thing over 275hp so ---- i hope my think holds togeter cuz im just wiating on my my bro to assemble the bottom end and do the plasti guage ---- on the bearings and then i can drop the head on and put it back in the car and break iit in then BOOST THE HELL OUT OF It.. well i hope i dont im gonna try to take it easy for a week or so ill try. i dont know how taht will work out since i got a built motor now.. and all that boost is tempting..
|
| All times are GMT -5. The time now is 02:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands