HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   pics of your crx/civic FMIC mounting locations (https://www.homemadeturbo.com/forced-induction-7/pics-your-crx-civic-fmic-mounting-locations-37019/)

jhmcrx 04-03-2005 12:14 AM

pics of your crx/civic FMIC mounting locations
 
if you have any saved on your computer or on a web page, post some pics or your crx/civic fmic without the bumper on, i mainy want to see how you guys mounted them...

FooK 04-03-2005 12:21 AM

Re: pics of your crx/civic FMIC mounting locations
 
i dont have pics yet but I can describe how mine was mounted, cause I did it today.

Across the top and bottom of the JRC 8" there are three bolt locations that stick out of the intercooler, about 7/16" wide.

I drilled a hole dead center under the beam in the center, where the top of the intercooler sits, then i drilled on on each side of that, exactly where those bolting locations on the intercooler are, so that the intercooler slides up into those holes. Then I used the tabs that came with it to bolt to two stock honda holes in the lower core support beam. Just used a couple honda 10mm bolts, simplest install i ever dealt with. 8" hangs way low tho.

I'll get pics tomorrow when there's daylight.

NBLKID 04-03-2005 01:18 AM

Re: pics of your crx/civic FMIC mounting locations
 
3 Attachment(s)
Attachment 38442
Attachment 38443
Attachment 38444

i just ziptied it on there to hold it in place and then drilled some holes for bolts, hope this helps.

y49crxsi 04-03-2005 04:13 AM

Re: pics of your crx/civic FMIC mounting locations
 
I just plamsa cut my bumper support, and bolted it right in. Fits likea glove. Plan on getting the 8" to fill the gap on teh bottom now.


http://www.oncallautos.com/images/crx1.jpg

rollmodel 04-03-2005 12:11 PM

Re: pics of your crx/civic FMIC mounting locations
 
there is mine

its pretty self explainatory on the mounting.. if you don't understand.. the tabs on the top are bolted, end of story ;)


FooK 04-03-2005 02:44 PM

Re: pics of your crx/civic FMIC mounting locations
 
it was too wet out to get under my car but this is what i got

http://www.centerlinemotorsports.com...mages/jrc1.jpg

http://www.centerlinemotorsports.com...mages/jrc2.jpg

eman5038 04-03-2005 03:47 PM

Re: pics of your crx/civic FMIC mounting locations
 

Originally Posted by y49crxsi
I just plamsa cut my bumper support, and bolted it right in. Fits likea glove. Plan on getting the 8" to fill the gap on teh bottom now.


http://www.oncallautos.com/images/crx1.jpg

Thats a pretty clean rex :P

PinoyB18A 04-03-2005 10:58 PM

Re: pics of your crx/civic FMIC mounting locations
 
^^^

I wish my CRX was that clean... :(

bumblezc 04-04-2005 10:25 AM

Re: pics of your crx/civic FMIC mounting locations
 
This summer's setup.
http://www2.propichosting.com/Images/421561701/28.jpg
Old setup
http://www2.propichosting.com/Images/421561701/8.jpg

nyc86zc 04-04-2005 12:00 PM

Re: pics of your crx/civic FMIC mounting locations
 
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg


All times are GMT -5. The time now is 03:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands