pics of your crx/civic FMIC mounting locations
 

if you have any saved on your computer or on a web page, post some pics or your crx/civic fmic without the bumper on, i mainy want to see how you guys mounted them...

Re: pics of your crx/civic FMIC mounting locations
 

i dont have pics yet but I can describe how mine was mounted, cause I did it today.

Across the top and bottom of the JRC 8" there are three bolt locations that stick out of the intercooler, about 7/16" wide.

I drilled a hole dead center under the beam in the center, where the top of the intercooler sits, then i drilled on on each side of that, exactly where those bolting locations on the intercooler are, so that the intercooler slides up into those holes. Then I used the tabs that came with it to bolt to two stock honda holes in the lower core support beam. Just used a couple honda 10mm bolts, simplest install i ever dealt with. 8" hangs way low tho.

I'll get pics tomorrow when there's daylight.

Re: pics of your crx/civic FMIC mounting locations
 

Attachment 38442
Attachment 38443
Attachment 38444

i just ziptied it on there to hold it in place and then drilled some holes for bolts, hope this helps.

Re: pics of your crx/civic FMIC mounting locations
 

I just plamsa cut my bumper support, and bolted it right in. Fits likea glove. Plan on getting the 8" to fill the gap on teh bottom now.


http://www.oncallautos.com/images/crx1.jpg

Re: pics of your crx/civic FMIC mounting locations
 

there is mine

its pretty self explainatory on the mounting.. if you don't understand.. the tabs on the top are bolted, end of story ;)

Re: pics of your crx/civic FMIC mounting locations
 

it was too wet out to get under my car but this is what i got

http://www.centerlinemotorsports.com...mages/jrc1.jpg

http://www.centerlinemotorsports.com...mages/jrc2.jpg

Re: pics of your crx/civic FMIC mounting locations
 

Thats a pretty clean rex :P

Re: pics of your crx/civic FMIC mounting locations
 

^^^

I wish my CRX was that clean... :(

Re: pics of your crx/civic FMIC mounting locations
 

This summer's setup.
http://www2.propichosting.com/Images/421561701/28.jpg
Old setup
http://www2.propichosting.com/Images/421561701/8.jpg

Re: pics of your crx/civic FMIC mounting locations
 

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re: pics of your crx/civic FMIC mounting locations
 

thought i would post mine...even though its a SMIC. I was pretty happy the way it mounted up. Its about the nicest thing on my car. :P
i just welded a peice of metal to the bottom of the crossmember, then drilled a hole in it, 1 bolt, holds solid as can be. if you grab it, move it up and down, you move the car with it. ;)
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

as you can see, I cut away at the inner fender well right at the top of the tire.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re: pics of your crx/civic FMIC mounting locations
 

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

I used metal hangar strap from Ace Hardware. You can get it at any local plumbing supply place.

Y49CRXSI: what kind of wheels are those? Where did you get them? Im looking for a set of 5 star that are similar to the S2K wheels, and those look pretty close.

Re: pics of your crx/civic FMIC mounting locations
 

http://performancefreaks.com/forum/a...hp?pic_id=1221


http://performancefreaks.com/forum/a...hp?pic_id=1220

Re: pics of your crx/civic FMIC mounting locations
 

Re: pics of your crx/civic FMIC mounting locations
 

Its all straight now, these are from fab and fitting time... not final fitment. Its 2 DSM Smics welded into a FMIC.
http://home.comcast.net/~typer/turbobuild/14.jpeg
http://home.comcast.net/~typer/turbobuild/16.jpeg