Hi im a noob to turbos. So i have a t25 from an sr20 and need some pics of where exactly the oil feed/return lines go. And its also water cooled, i have heard you dont have to run water to it is that true. Any help,thanks.

ps.told you im a noob.

 

google.com n00b

 

Already tried bro.

 

Oil feed in the oil feed hole, return from the return hole, screw the water lines.

 

That dosent tell me which is which.

 

take a spark plug out and shove one oil line down there, then run the drain rap it around your neck and over a tree then into your intake. Seariously, search better noob stick.

 

Or if you searched and found it you could just post it instead of being a douche bag.

 

Sure it does. The one that the oil feed goes to is the oil feed hole. The one that the oil return goes to is the oil return hole. Doesn't get much easier than that cupcake.

 

in this pic you see the drain. on either side is the water inlet/outlet. what you cant see opposite of the drain is the oil inlet, of course.


sorry if my palms are sweaty.

 

Hear, take your oil sensor out, put a t in it, run it to the small hole on the turbo. Drill a hole in your oil pan, weld, glue, jbweld, tape what ever the ---- it takes to get the job done a drain pipe and run a hose from the big hole to it. Seariously.