PCV valve Y8
is the pcv valve under the fuel rail and goes back into the intake mani on a y8? so to make a catch can do i take the hose from the valve cover to my catch can to the intake part of turbo then wat do i do with the other end of the hose going into the mani ? do i plug this up or can i make a T and run my bov and boost gauge in it?
|
Re: PCV valve Y8
dude are you serious??? like 5 post up is a ------ write u pon this ----.
https://www.homemadeturbo.com/forum/...?topic=41175.0 |
Re: PCV valve Y8
i read that10 times im confused
|
Re: PCV valve Y8
pcv valve----->catch can------>pre turbo........plug the intake mani where the pcv ran to and slap an air filter on the valve cover then call it a day ;)
|
Re: PCV valve Y8
thanks u helped me a million
|
Re: PCV valve Y8
Originally Posted by djfob
pcv valve----->catch can------>pre turbo........plug the intake mani where the pcv ran to and slap an air filter on the valve cover then call it a day ;)
|
Re: PCV valve Y8
mine idles fine with the way it's set up
|
Re: PCV valve Y8
i think my lines may be too small, and i still need some tuning
|
Re: PCV valve Y8
1 Attachment(s)
JDM, to do that setup you can just use this:
Attachment 37666 the bottom connects to the black box, or gutted stock pcv. the one that says pre-turbo intake, hook that up to a catch can, then a pre-turbo intake then the other one to the check valve, then to the intake mani. hope this helps matt. |
Re: PCV valve Y8
so i run check valves on my catch can piping before the catch can and after the pcv ? i thought i ran check valves on my map sensor on the intake manifold
|
All times are GMT -5. The time now is 12:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands