HomemadeTurbo - DIY Turbo Forum

Forced Induction Custom FI Setup Questions

PCV

   
Old 03-08-2007, 08:37 AM
  #1  
3.0 BAR
Thread Starter
 
MAJORAHOLE's Avatar
 
Join Date: Apr 2005
Posts: 1,521
Default PCV
thinking about my pcv setup
wondering if this would do the job.
the blue are valves
Name: pcv1.jpg Views: 7 Size: 15.7 KB
MAJORAHOLE is offline  
Reply
Old 03-08-2007, 08:49 AM
  #2  
HMTguy
Guest
 
Posts: n/a
Default Re: PCV
I don't see the point of your valves, they are essentially allowing flow in both directions negating themselves.

Just use a straight line instead of using 2 Ts and 2 check valves. Setup looks fine.
 
Reply
Old 03-08-2007, 10:11 AM
  #3  
3.0 BAR
 
E-b0la's Avatar
 
Join Date: May 2006
Posts: 1,967
Default Re: PCV
Yeah the valves aren't going to do a whole lot. Just use a straight line for a setup.
E-b0la is offline  
Reply
Old 03-08-2007, 10:48 AM
  #4  
3.0 BAR
Thread Starter
 
MAJORAHOLE's Avatar
 
Join Date: Apr 2005
Posts: 1,521
Default Re: PCV
ya i thought of that after the fact.
should i just use fuel line or what? i remember someone using clear tube, but i don't want that sticking out under tha hood. i'm sure it will turn yellow after a while too
MAJORAHOLE is offline  
Reply
Old 03-08-2007, 10:53 AM
  #5  
HMTguy
Guest
 
Posts: n/a
Default Re: PCV
Who cares if it turns yellow, use whatever you want. It doesn't matter.
 
Reply
Old 03-08-2007, 11:03 AM
  #6  
3.0 BAR
Thread Starter
 
MAJORAHOLE's Avatar
 
Join Date: Apr 2005
Posts: 1,521
Default Re: PCV
i care and ok.
MAJORAHOLE is offline  
Reply
Old 03-08-2007, 12:40 PM
  #7  
3.0 BAR
 
Cray91's Avatar
 
Join Date: May 2004
Posts: 5,042
Default Re: PCV
Originally Posted by MAJORAHOLE
i care and ok.
You are a tard.

Drill out the PCV and just point a hose to the ground from it.
Cray91 is offline  
Reply
Old 03-08-2007, 01:06 PM
  #8  
3.0 BAR
Thread Starter
 
MAJORAHOLE's Avatar
 
Join Date: Apr 2005
Posts: 1,521
Default Re: PCV
yup






























Name: dancing-image-s.gif Views: 6 Size: 129.1 KB
MAJORAHOLE is offline  
Reply
Old 03-08-2007, 02:50 PM
  #9  
3.0 BAR
 
samson's Avatar
 
Join Date: Mar 2005
Posts: 3,161
Default Re: PCV
Originally Posted by Cray91
You are a tard.

Drill out the PCV and just point a hose to the ground from it.

Seriously, just vent it to the ground.


JP
samson is offline  
Reply
Old 03-08-2007, 05:58 PM
  #10  
3.0 BAR
 
Slo_crx1's Avatar
 
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Default Re: PCV
Originally Posted by samson

Seriously, just vent it to the ground.


JP
That's all I'm doing this time, the hell with crazy pcv setups. I went one step further and pulled the pcv valve out completely and dropped a line to the ground from the top of the stock catch can.
Slo_crx1 is offline  
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Quick Reply: PCV


Reply Closed Thread Share

All times are GMT -5. The time now is 06:30 PM.