street_kings

Return line is barely touching the downpipe. I'm using a stealthmode kit, which has the stainless lines, but would it cause any probs if they're touching?

turboDXcoupe

is it the oil return? i mean as long as it wont melt it or if its not the oil feed you know but if i were you dont let it touch ...do whatever to make it not touch..."Do things right the first time"

quadnie

heat shield

street_kings

Good call quandine!

Qwiksand

Mine does this too. My solution was to wrap the downpipe in header wrap, but I'm also using a thick *** piece of hydrolic hose as my return and it shows no signs of heat damage.

MikeJ-2009

Guys, Its been a while since I discussed this with my supplier, but I believe the temp. these lines could handle was in the 1000's. I can't remember the exact number, but it's pretty high.
I know Ghetto D has his feedline resting on his "ram head" manifold and we were looking at it the other day. No signs of anything yet. I'll get ahold of the supplier and double check the heat tolerances. Short term you will be ok, but for long terms sake, I will find out.

LSD Motorsports

Stainless steel braided lines can handle that ----, id move it off with a wire tie if u can get one somewhere it wont melt. but regardless u get it off the dp

quadnie

thank you, put let me keep on it:

cut up a tin roof and install it as a heat shield.

HMT-Admin

depending on how bad it was touching I guess, but if its stainless it should be fine.

fork

It's probbly not going to explode, but why don't you just zip tie it out of the way so you don't risk anything.