Oil Return Problems
 

Hey guys.

After being a dumb ---- and welding the oil return in a bad spot, i realised that its to far to the right. eg.

If i was to run a pipe from the turbo to the sump, it would hit the down pipe. So to run the pipe, it has to take a slow downhill trip to the right around the downpipe then into the sump. Its still all downhill, but not that steap


Help :)

Thanks

Re:Oil Return Problems
 

Can't really suggest anything with no pic but if your doubting it you could just seal up the ---- up and reweld it in a better spot.

Re:Oil Return Problems
 

I agree. If just welded a nipple on there, just cut that fucker off, then tap in some threads and just use a bolt to seal it off. JB weld that bolt in there and call it a day. If it's a D series pan, you could always cheaply replace that bitch.