Oil Pans 92-95, 96-00 are they interchangeable????
 

So I have a D16Y8 and my oil pan has a hairline crack. (Bottomed out pretty hard last night). I have a buddy with a non vtec oil pan 92-95. So here are my questions for all you smart D guys:

Will it fit interchangeably with my oil pan :1

Should I just JB Weld it like the guys at the autoparts store suggested :6

Of course the douchebags at the local Honda dealership couldn't help they only go by part #'s and of course the #'s are going to be different.

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

different pans

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

Jb weld that ---- now son

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

96-00 pans use a larger radii on the oil pump, no way to interchange.

Raise your car to prevent crackerage

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

Only way to use an older pan is to use the older oil pump and pickup correct?

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

oil pumps are not interchangable, different bolt patterns for the oil pan.

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

Well the general concensus says that it won't fit. Thanks. Now about the JB Weld. Will it hold? And if it does, should I just use it as a temporary replacement until I get a new one?? Thanks again everyone.

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

Clean the pan and scuff it up a bit before you use the JB weld. It will hold just fine, you can use it as a permanent solution ;)

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

i dont think so

Re: Oil Pans 92-95, 96-00 are they interchangeable????
 

you don't think so about what?