Oil Pan Fitting
What kind of fitting are you guys using on the oil pan? I'm trying to figure out what stuff I'll need and so far I've came up with this. Correct me if any of this is wrong, because im really confusused. I just basically copied setups on the site. The setup is a 14b on a d16y7, with z6 intake manifold, and gsr tb. Thanks in advance.
350psi 1/4 hose 2 brass T (any special size??) 5/16 fuel line 1/4 brass fitting 1/8npt brass extension to 3 way splitter 1/8npt brass barb |
Re:Oil Pan Fitting
Use one as big as possible, make sure the mounting on the pan is above the oil level.
|
Re:Oil Pan Fitting
Just use a brass fitting and weld it on?
|
Re:Oil Pan Fitting
mine is just screwed in...it doesnt even need to seal well really since its above the oil level
|
Re:Oil Pan Fitting
hole in block is 1/8 bspt
aftermarket oil press sender is ussually 1/8 npt. i use 8 an bulk head connector on oil pan |
All times are GMT -5. The time now is 08:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands