OIL LINES ????
#1
OIL LINES ????
so im looking around for oil feed lines and i see a bunch with "restricted" flow ... is this some sort of bullshit .. or does it actually do what they claim it does help would be appreciated
#2
Alot of people are running -3an lines without restrictors with no problems. Either it's got a restrictor in it usually .65, or it's a small -3an line. I would definitly run a restrictor, but make one out of JB weld in the fitting, with an appropriatly sized hole drilled in it. If you run without one, you run the chance of chewing up the turbo seals in short notice.
#3
#4
but if u have a small feed line .. or even a restrictor .. doesnt that mean ur gonna have higher pressure and less oil volume .. which would ruin the seals by having more pressure and less oil hmm idk some of my freinds ran just a normal line and said it was fine ... i just need more opinions
#5
but if u have a small feed line .. or even a restrictor .. doesnt that mean ur gonna have higher pressure and less oil volume .. which would ruin the seals by having more pressure and less oil hmm idk some of my freinds ran just a normal line and said it was fine ... i just need more opinions
#8
I have a LC-BB Turbo, it uses less oil because of the water cooling..
I knew that I did not need it, if you are unsure, then get one.
Get the restriction valve unless you know otherwise.
If your turbo fails in under 3000mi, get a new one and take the restriction valve off.
I knew that I did not need it, if you are unsure, then get one.
Get the restriction valve unless you know otherwise.
If your turbo fails in under 3000mi, get a new one and take the restriction valve off.
#10