Re: oil feed line
 

kk so what size line should i use to feed the turbos

Re: oil feed line
 

-3 or -4 works good

Re: oil feed line
 

3mm to 5mm Oil resistent hose will do it, or just buy a kit at www.---------------------------

Re: oil feed line
 

to poor

Re: oil feed line
 

I would think that 1/4 hose would work well.

Get some hose barbs, some epoxy and some good hose clamps. Either that or use brake line. That's cheap enough, no?

Re: oil feed line
 

what kinda hose

Re: oil feed line
 

You have over 700 posts, you have been here since May and you still dont know how to use the search function? Or how about maybe look through the turbo projects to see what they use for oil feed?

Lemme Guess you can only work with pictures, or sign language?

https://www.homemadeturbo.com/misc/retard2.jpg

Do you understand those? ::)

https://www.homemadeturbo.com/misc/retard3.jpg

Like I said 1/8th to 1/4in Barb.. ok I tried to make it easy for you so I labeled it

1. The brass Barb, you can get these at automotive stores, home depot etc, they are about 79 cents each
2. The brass T it has an extension on it so it moves it away from the block, and in your case you will need one that has 4 (2 for the turbos, 1 in, and 1 for your oil pressure sender) this costs about 2.00
3. This is the oil pressure sender, it doesnt look like a ford one, but you get the idea.

The hose, its from Napa. It's called weatherhead, it can substain a decent amount of heat, its rated at 350psi, and comes in various sizes. It's worked great on lots of HMT setups in the past for me. It's around 5.50-6.50 a foot

Does this answer your questions?

Re: oil feed line
 

are you talkign about the fitting to tap the block?

go to a hardware store with your oil pressure sender and the oil log and find some fittings that fit.

https://www.homemadeturbo.com/jbliss.../mustang21.jpg

Re: oil feed line
 

I don't understand. Help. :X

Re: oil feed line
 

Well tickle my nuts and call me Sally