oil feed line
question the fiting on the oil inlet is 1/8 is that to small for a feed line
|
Re: oil feed line
no
|
Re: oil feed line
what size then
|
Re: oil feed line
huh? how come everyone of your posts never make sense.
1/8th is on just about every junkyard turbo or aftermarket hybrid t3/t4. Are you asking what size Barb you want to go to? if so, I'd go with a 1/4in Barb, or if your going to use AN fittings, I'd go with a -3 an fitting. Did this answer your question? |
Re: oil feed line
from the turbo to the engine what size
|
Re: oil feed line
help me please
|
Re: oil feed line
from the turbo to the engine what size |
Re: oil feed line
lol, 700+ posts.......
from the turbo to the engine what size __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: oil feed line
what is that in standard carquest wont understand that
|
Re: oil feed line
what is that in standard carquest wont understand that |
Re: oil feed line
kk so what size line should i use to feed the turbos
|
Re: oil feed line
-3 or -4 works good
|
Re: oil feed line
3mm to 5mm Oil resistent hose will do it, or just buy a kit at www.---------------------------
|
Re: oil feed line
to poor
|
Re: oil feed line
I would think that 1/4 hose would work well.
Get some hose barbs, some epoxy and some good hose clamps. Either that or use brake line. That's cheap enough, no? |
Re: oil feed line
what kinda hose
|
Re: oil feed line
You have over 700 posts, you have been here since May and you still dont know how to use the search function? Or how about maybe look through the turbo projects to see what they use for oil feed?
Lemme Guess you can only work with pictures, or sign language? https://www.homemadeturbo.com/misc/retard2.jpg Do you understand those? ::) https://www.homemadeturbo.com/misc/retard3.jpg Like I said 1/8th to 1/4in Barb.. ok I tried to make it easy for you so I labeled it 1. The brass Barb, you can get these at automotive stores, home depot etc, they are about 79 cents each 2. The brass T it has an extension on it so it moves it away from the block, and in your case you will need one that has 4 (2 for the turbos, 1 in, and 1 for your oil pressure sender) this costs about 2.00 3. This is the oil pressure sender, it doesnt look like a ford one, but you get the idea. The hose, its from Napa. It's called weatherhead, it can substain a decent amount of heat, its rated at 350psi, and comes in various sizes. It's worked great on lots of HMT setups in the past for me. It's around 5.50-6.50 a foot Does this answer your questions? |
Re: oil feed line
are you talkign about the fitting to tap the block?
go to a hardware store with your oil pressure sender and the oil log and find some fittings that fit. https://www.homemadeturbo.com/jbliss.../mustang21.jpg |
Re: oil feed line
I don't understand. Help. :X
|
Re: oil feed line
Well tickle my nuts and call me Sally
|
Re: oil feed line
Originally Posted by jagojon3
Well tickle my nuts and call me Sally
|
Re: oil feed line
Originally Posted by AbaZ
You have over 700 posts, you have been here since May and you still dont know how to use the search function? Or how about maybe look through the turbo projects to see what they use for oil feed?
Lemme Guess you can only work with pictures, or sign language? https://www.homemadeturbo.com/misc/retard2.jpg Do you understand those? ::) https://www.homemadeturbo.com/misc/retard3.jpg Like I said 1/8th to 1/4in Barb.. ok I tried to make it easy for you so I labeled it 1. The brass Barb, you can get these at automotive stores, home depot etc, they are about 79 cents each 2. The brass T it has an extension on it so it moves it away from the block, and in your case you will need one that has 4 (2 for the turbos, 1 in, and 1 for your oil pressure sender) this costs about 2.00 3. This is the oil pressure sender, it doesnt look like a ford one, but you get the idea. The hose, its from Napa. It's called weatherhead, it can substain a decent amount of heat, its rated at 350psi, and comes in various sizes. It's worked great on lots of HMT setups in the past for me. It's around 5.50-6.50 a foot Does this answer your questions? Wut syze fittin dos i neeed? :S __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: oil feed line
well i rather no put a to small of a line on so ya
|
Re: oil feed line
(read the parenthesis. i attempted to convert moron into english)
well i rather no(t) put (excluded) to small of a line on so ya :1 |
Re: oil feed line
---- that im not a ricer
|
Re: oil feed line
---- that im not a ricer were allll ricers!!!! turbo hondas are teh gh3y |
Re: oil feed line
ya ok lol
|
Re: oil feed line
don't forget you need to add gear oil to your engine for madd power to feed those ss turbos. and block off your oil return coz that ---- costs too much much ---- it u don't need it DO IT............don't be a ricer
|
Re: oil feed line
o ok thanks
bullshit ---- that |
Re: oil feed line
Would this work for the feed line?
http://cgi.ebay.com/SAE100R2AT-High-...QQcmdZViewItem And this for the return? http://cgi.ebay.com/Weatherhead-High...QQcmdZViewItem You'd probably need an AN to NPT adapter or something but hey 30 bucks for hoses |
All times are GMT -5. The time now is 07:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands