oil feed installation questions D's only
hello fellas
let me ask this first... -do you guys have this plastic wires rail in your D-serise engines? -is this a oem oil pressure sensor? its supposed to be a 23mm right? -how did you installed your feed line? did you did it from under the car,or did you removed the intake manifold and did it from the top? http://img157.echo.cx/img157/7233/img02247ad.jpg thanx for now ill ask the more importent q's after some of you will answer. best reagards moshik galimidi |
Re: oil feed installation questions D's only
cant remember the size, but yes i took it out from the bottom, yes the wire cover was there
|
Re: oil feed installation questions D's only
I just took mine out today and tee'd it off. I had my intake manifold off so it was easy. It wasn't on that tight but I used a big ass 15/16 wrench. I zipped tied the tee to the plastic wire rail. Used about 5' of line with about 1/2 foot of slack. I put a 1/4" to 1/8 npt barb on the block but you'll need a 1/8"bspt to 1/4" npt adapter. I'll put up pic's if someone tells me how to post it. Hope this helps
|
Re: oil feed installation questions D's only
I have a 3 way sandwich plate...
1 for oil press sensor 2 for oil temp sensor 3 for turbo feed line |
Re: oil feed installation questions D's only
Originally Posted by t0n
I have a 3 way sandwich plate...
1 for oil press sensor 2 for oil temp sensor 3 for turbo feed line |
Re: oil feed installation questions D's only
real useful post ------------------------ so what about that plastic rail? did you guys relocated it or something? it seems like it will touche the Tee/sensor?!? |
Re: oil feed installation questions D's only
Tuner toys sells an awsome product for this exact thing.
call the firewall kit. It has the tuner toys block fitting like the normal kit, but comes w/ a shorty ss hose that reachest he firewall. at the end of that there's a T-fitting so u can tap it there for a sender unit for PSI. then continue on to the turbo. |
Re: oil feed installation questions D's only
Originally Posted by crx88Si
Tuner toys sells an awsome product for this exact thing.
call the firewall kit. It has the tuner toys block fitting like the normal kit, but comes w/ a shorty ss hose that reachest he firewall. at the end of that there's a T-fitting so u can tap it there for a sender unit for PSI. then continue on to the turbo.
Originally Posted by racepak
so what about that plastic rail? did you guys relocated it or something? it seems like it will touche the Tee/sensor?!? |
Re: oil feed installation questions D's only
easy solution: if it gets in the way, unbolt it and move it. If not, leave it.
|
All times are GMT -5. The time now is 05:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands