hello fellas

let me ask this first...

-do you guys have this plastic wires rail in your D-serise engines?

-is this a oem oil pressure sensor? its supposed to be a 23mm right?

-how did you installed your feed line? did you did it from under the car,or did you removed the intake manifold and did it from the top?




thanx for now ill ask the more importent q's after some of you will answer.

best reagards moshik galimidi

 

I just took mine out today and tee'd it off. I had my intake manifold off so it was easy. It wasn't on that tight but I used a big *** 15/16 wrench. I zipped tied the tee to the plastic wire rail. Used about 5' of line with about 1/2 foot of slack. I put a 1/4" to 1/8 npt barb on the block but you'll need a 1/8"bspt to 1/4" npt adapter. I'll put up pic's if someone tells me how to post it. Hope this helps

 

I have a 3 way sandwich plate...

1 for oil press sensor
2 for oil temp sensor
3 for turbo feed line

 

:P :P :P
------------------------

so what about that plastic rail? did you guys relocated it or something? it seems like it will touche the Tee/sensor?!?

 

Tuner toys sells an awsome product for this exact thing.

call the firewall kit. It has the tuner toys block fitting like the normal kit, but comes w/ a shorty ss hose that reachest he firewall. at the end of that there's a T-fitting so u can tap it there for a sender unit for PSI. then continue on to the turbo.

 

i dont wanna buy a new kit.. i allready have the kit from stan.