obd 2 -1 quick question
04-24-2005, 10:20 PM
#1
1.0 BAR
Thread Starter
Join Date: Jan 2005
Posts: 319
obd 2 -1 quick question
K i have a 97 dx hatch and i want to go to obd 1 so i can use uber. but i dont know what ecu to use.. would it be fine to use a p06 non vtec or a p28 vtec and will this work?? and i wanted to hook a 96-00 dash stock gauge cluster in with a tach .. will it just plug right in?
04-25-2005, 12:37 AM
#3
1.0 BAR
Join Date: Jul 2004
Posts: 321
Re: obd 2 -1 quick question
the gauge cluster should plug right in as far as i know.
i have a 2000 dx with the y7 running obd1 and uberdata on a p06. i believe you can use either ecu and just disable the vtec if you need to. make sure to get an obd2 v. 1 harness, there was a change in the obd2 between the 96-98 and 99-00 models.
i got my harness from jdmshit.com for around 85$.
i have a 2000 dx with the y7 running obd1 and uberdata on a p06. i believe you can use either ecu and just disable the vtec if you need to. make sure to get an obd2 v. 1 harness, there was a change in the obd2 between the 96-98 and 99-00 models.
i got my harness from jdmshit.com for around 85$.
Thread
Thread Starter
Forum
Replies
Last Post
