nukkawhat manifold
#1
nukkawhat manifold
I'm trying to figure out how I'm going to do my next manifold. I already have some 1.5 inch pipe and I've cut several angles on it already for some whitey bends, here's my basic idea, I want to put the compressor inlet at the front of the car because I'm just gangsta like that and I have no front mount and I have a half radiator so there's just a hole in my front bumper doing nothing for me right below where the turbo sits now. here it is:
I'm going to have 3 2-1 collectors because they are easier than 1 4-1 collector since I don't have any way to hold the pipe at a perfect 90 when I make the 2 different cuts. now that I'm thinking about it the pipes are getting too small toward the turbo, and the final pipe going into the turbo will be way smaller than the opening in the flange. I might try some trickery to get the 4-1 collector to work for me, I'll let you know how it goes.
I'm going to have 3 2-1 collectors because they are easier than 1 4-1 collector since I don't have any way to hold the pipe at a perfect 90 when I make the 2 different cuts. now that I'm thinking about it the pipes are getting too small toward the turbo, and the final pipe going into the turbo will be way smaller than the opening in the flange. I might try some trickery to get the 4-1 collector to work for me, I'll let you know how it goes.
#5
Re:nukkawhat manifold
Originally Posted by hotrex
talk to vtenlude hell hook you up with a collector, its only 45 shipped save urself the trouble
Looks like it's going to be a bit restrictive if the collector is a 1.5" pipe. The design is cool though.
#9
Re:nukkawhat manifold
the car runs ********, it just doesn't run all that well. I used super geometry skillz to mark my pipes at 90s, so I'm going to attempt my own collector, we'll see how it goes. and yes, the pipes will be sealed, they look like *** right there because my rhino3d skillz aren't what they were 2.5 years ago when I took that class.