nukkawhat manifold
I'm trying to figure out how I'm going to do my next manifold. I already have some 1.5 inch pipe and I've cut several angles on it already for some whitey bends, here's my basic idea, I want to put the compressor inlet at the front of the car because I'm just gangsta like that and I have no front mount and I have a half radiator so there's just a hole in my front bumper doing nothing for me right below where the turbo sits now. here it is:
http://img31.exs.cx/img31/8052/manitype27sa.jpg I'm going to have 3 2-1 collectors because they are easier than 1 4-1 collector since I don't have any way to hold the pipe at a perfect 90 when I make the 2 different cuts. now that I'm thinking about it the pipes are getting too small toward the turbo, and the final pipe going into the turbo will be way smaller than the opening in the flange. I might try some trickery to get the 4-1 collector to work for me, I'll let you know how it goes. |
Re:nukkawhat manifold
talk to vtenlude hell hook you up with a collector, its only 45 shipped save urself the trouble
|
Re:nukkawhat manifold
on second thought why not get your car running first.. :P
|
Re:nukkawhat manifold
what size tube are you going to use? What is this gonna be used on and with what turbo?
|
Re:nukkawhat manifold
Originally Posted by hotrex
talk to vtenlude hell hook you up with a collector, its only 45 shipped save urself the trouble
Looks like it's going to be a bit restrictive if the collector is a 1.5" pipe. The design is cool though. |
Re:nukkawhat manifold
dood you gotta seal up those bends better or you're gonna get a wicked leak.
|
Re:nukkawhat manifold
Nooo... I thought he was gonna leave it like that?? :P
|
Re:nukkawhat manifold
my next manifold is actually going to be a 3-2-1 collector.
|
Re:nukkawhat manifold
the car runs assholes, it just doesn't run all that well. I used super geometry skillz to mark my pipes at 90s, so I'm going to attempt my own collector, we'll see how it goes. and yes, the pipes will be sealed, they look like ass right there because my rhino3d skillz aren't what they were 2.5 years ago when I took that class.
|
Re:nukkawhat manifold
are you doing a 4-1 or a 3-2-1 collector?
|
Re:nukkawhat manifold
Originally Posted by Whitey
are you doing a 4-1 or a 3-2-1 collector?
|
Re:nukkawhat manifold
is that thing equal length.
|
Re:nukkawhat manifold
Originally Posted by sccaeg
is that thing equal length.
|
Re:nukkawhat manifold
i cant wait to see the end result. im sure it will make your car run correctly. :P
|
Re:nukkawhat manifold
Originally Posted by sccaeg
i cant wait to see the end result. im sure it will make your car run correctly. :P
|
Re:nukkawhat manifold
what about that mad type s manifold you have now? that thing is mad style yo.
|
Re:nukkawhat manifold
Originally Posted by Kyle
Originally Posted by sccaeg
i cant wait to see the end result. im sure it will make your car run correctly. :P
You just wanna be like me, whitey bends and front facing turbo :P |
Re:nukkawhat manifold
Originally Posted by Whitey
You just wanna be like me, whitey bends and front facing turbo :P |
Re:nukkawhat manifold
everyone gets an error message when they pm me but I usually get them (I think :-\) My turbo is off to the side and the chargepipes are curved so it kinda has the front facing effect. When you look at the front of the car you can see the compressor next to the intercooler
|
Re:nukkawhat manifold
whitey wheres the link yo your new setup bitch
|
Re:nukkawhat manifold
|
Re:nukkawhat manifold
Thanks Kyle. You can also see my manifold in a H-T thread where they're talking ---- on the welds when its not even welded ::)
http://www.honda-tech.com/zerothread?id=1079110 its on pg 3 and on. |
Re:nukkawhat manifold
whitey it's past thanksgiving, is the green goblin done yet?!?
|
Re:nukkawhat manifold
Originally Posted by whiterice
whitey it's past thanksgiving, is the green goblin done yet?!?
almost, I just gotta weld on the wastegate. I'll post a pic later tonight so we can stop hijacking Kyle's thread |
Re:nukkawhat manifold
Originally Posted by Whitey
I'll post a pic later tonight so we can stop hijacking Kyle's thread
kyle, i have a good design for you. it involves a j-bend and any stock manifold. hit me up. |
Re:nukkawhat manifold
hijacking of threads is mandatory here at hmt, hijack away.
|
Re:nukkawhat manifold
I need to learn how to weld.
|
Re:nukkawhat manifold
Originally Posted by hotrex
talk to vtenlude hell hook you up with a collector, its only 45 shipped save urself the trouble
|
Re:nukkawhat manifold
Originally Posted by Whitey
Thanks Kyle. You can also see my manifold in a H-T thread where they're talking ---- on the welds when its not even welded ::)
http://www.honda-tech.com/zerothread?id=1079110 its on pg 3 and on. |
Re:nukkawhat manifold
Originally Posted by accordepicenter
what size tube are you going to use? What is this gonna be used on and with what turbo?
|
Re:nukkawhat manifold
why dont u guys use 2 inch pipe
and kyle els are just 4.80 canadian over here im sure its even cheaper there a few els will save u like 2 hours |
Re:nukkawhat manifold
Originally Posted by Ravage70
why dont u guys use 2 inch pipe
and kyle els are just 4.80 canadian over here im sure its even cheaper there a few els will save u like 2 hours and 2 inch pipe has no love for honda exhaust ports, it doesn't fit the flange. |
Re:nukkawhat manifold
---- that ----, I tried doing the 4-1 collector today and it was really shitty. the 90s I marked on the pipes weren't exact, that gave me ----, the pipe kept rotating when I was cutting it, when I did cut it it was way off because the lines weren't right and the pipe rotated while I was cutting it so I ended up just guessing where to cut all of them and it turned out like complete ----. so whenever I decide to order my flanges and put this thing together I'll pm you vtecnlude.
|
Re:nukkawhat manifold
for 2 inch pipe u need a torch and a hammer
u gotta heat up the pipe where the bolts are and nockem a bit inwards |
All times are GMT -5. The time now is 03:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands