HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   not reaching full boost (https://www.homemadeturbo.com/forced-induction-7/not-reaching-full-boost-81493/)

jdubs111 08-15-2007 12:09 PM

not reaching full boost
 
it seems like the hotter it gets here the less boost i can produce. i had a external gate(6psi spring) and mbc trying to reach 12psi. but now that the ------- heat has set in i can only get to 5-6psi tops. when temps go down at night 7-8psi tops. i ditched the mbc and got a 14.5psi spring and it still does the same thing. what could be causing this?

dopey88 08-15-2007 12:34 PM

Re: not reaching full boost
 
do a leak test you may have a leak in your charge pipes or at your intercooler that is what happened to me

jdubs111 08-15-2007 12:57 PM

Re: not reaching full boost
 
i am measuring boost pressure off the manifold and am pretty sure i dont' have any leaks. it seems like the hotter it gets outside the less boost is produced.

flipkronikz 08-15-2007 01:06 PM

Re: not reaching full boost
 
must be a boost leak

jdubs111 08-16-2007 07:40 PM

Re: not reaching full boost
 
i guess i'll have to check for boost leaks since nothing else could be causing this to happen.

talonator1488 08-17-2007 01:10 AM

Re: not reaching full boost
 
Make sure your guage is working right. I have an autometer sport comp 2 and it gets stuck at 5 psi sometimes. Sounds like a big boost leakthough. Make sure you have a fire ring on the wastegate.


All times are GMT -5. The time now is 12:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands