Is this normal?
#1
Is this normal?
I recently bought a AiResearch turbo that came off a Volvo.
Condition: There is very minimal up and down shaft movement, there is no horizontal shaft movement, the fins spins freely and are not touching the housing and the fins are in very good shape.
I noticed that whenever I hold the turbo so that the compressor side is facing downwards, oil drips out of the hose that is connected to the wastegate actuator and the compressor housing. Is this normal?
Condition: There is very minimal up and down shaft movement, there is no horizontal shaft movement, the fins spins freely and are not touching the housing and the fins are in very good shape.
I noticed that whenever I hold the turbo so that the compressor side is facing downwards, oil drips out of the hose that is connected to the wastegate actuator and the compressor housing. Is this normal?
#4
Re:Is this normal?
Originally Posted by alwaystootall
sounds like oil was getting past the seal from the pressure mine did that to. there was oil laying in the compressor housing is it normal for that turbo maybe but is it wanted, no
#5
Re:Is this normal?
Originally Posted by 45psi
yeah, if you can spring for a rebuild kit now, its way better doing it when you have to take off the car.
Thank you. Do you know where I can get a repair kit for a good price?
Thread
Thread Starter
Forum
Replies
Last Post