NOOB kit build
 

-D16y8 block-
I have been doing a lot of research on piecing together a kit and this is what I have come up w/ so far for my first turbo kit. Once I get back from the desert I am going to start buying up some ----. I eventually look to get about 300whp out of this ----.

-T3 T4E 57 trim .63AR
-Manifold .... HF i guess w/ T3 adapter plate
-Tial 38mm WG w/ .45bar spring
-HKS SSQV BOV
-down pipe / dump tube made custom at shop
intercooler ... not sure on whats best bang for the buck for 300hp goal...

-550cc RX7 injectors
-Stock fuel rail
-255lph Fuel Pump from Xenocron

-Crome chipped ecu w/ datalogging,
Moates EPROM emulator and LC-1 WB kit from Xenocron for tuning - 540


-Stealthmode Oil line Kit

-LSD clutch kit

-I got a few newb questions. I have looked around but am not sure still. (flame away)
-What is a dump tube? I hear about one and how it should be located a certain way, but do not know what it is.
-With Crome can you adjust your timing?

I am open to helpful suggestions on parts for my kit. When I get this kit together I plan on picking up another y8 block to build up so I can boost the ---- out of it.

:6

Re: NOOB kit build
 

- It's where excess exhaust gasses go once the wastegate opens

- yeah, else it would be worthless

Re: NOOB kit build
 

You dont want a missing link with a chipped ecu, you dont want to hide the boost from the map sensor if your ecu is chipped. keep reading noob you have a long way to go.

Re: NOOB kit build
 

Thanks for the replies guys. So take away the missing link do you think the setup so far is capable of 300hp? I am not sure if I need to upgrade the fuel pump / fuel rail to acheive my goal. Any suggestions on injector size?
:6

Re: NOOB kit build
 

go to dsm 440 or 450cc injecters

Re: NOOB kit build
 

i was told that the DSMs would be maxed out for 300hp goal... hmmm

Re: NOOB kit build
 

u aiant going to 300 with a stock map sensor. also add up a clutch kit in that list

Re: NOOB kit build
 

btw what internals?

Re: NOOB kit build
 

Your D wont handle 300 dude. you are going to need to think about pistons and rods before you cross that 225 250 HP mark

Re: NOOB kit build
 

yo my setup seems to be very similar to what you want

d16y8
Basic log mani
Real t3/t04e 54 trim with .63 exhaust and stage 3 wheel
tial 38mm wastegate at .8bar
cca fmic
hks ssqv
3 bar map sensor
dsm 450's
xenocron 255lph fuel pump
stealthmode oil lines with stealthmode firewall kit and restrictor
crome
moates burn1 on its way to replace the willem burner
also has arp headstuds

been boosted for over a year with no major problems...some of the stuff i have is kinda baller and can easily be replaced with knockoffs (bov, wg especially)

Re: NOOB kit build
 

thanks for the replies guys..
I was looking at that GM 3bar map sensor.
as far as clutch I am not sure what cluth (brand / stage) to put in. I had an Exedy clutch on my 91crx and it felt really good but it was stock sooo..
For engine internals once the turbo kit is in and operational I plan on getting a y8 block and building that w/ Vitara pistons and TT rods. I dont know much about what to do to the head( if I need better valves/springs). I will definately throw on some ARP head studs.

Hey cberman how much hp you putting down man? Is your HKS SSQV annoyingly loud? I was looking at that BOV cause you could put that gold cap thing on to change the sound some.

Re: NOOB kit build
 

get your clutch from LSD...check the stickies in the classifieds.
you can make 200 something with that set up...and then build the bottom end up for more.
gm 3bar or motorola 2.5 is good too.
do the walbro 255, and the stock rail is fine.
pretty much any front mount is good.

Re: NOOB kit build
 

NO porn?????
:3

Re: NOOB kit build
 

man i am getting excited as ---- to get back home, and get this project started. I would post some porn for ya guys but I cannot for 2 reasons... . #1 this is a government computer and they monitor everything, and #2 its illegal over here in the desert due to laws in the host nation. I will take some pics of some exploded ---- w/ a HMT OWNS sign by it. I will try and get the pictures w/n the next few days.

Re: NOOB kit build
 

Its not too loud...if i were to do it again, tho, i certainly wouldnt spend that kinda money on a bov...it has a very unique sound i think, and the loud ---- annoys the ---- out of me

my car has never been dynoed but id expect somewhere in the 200 - 225 whp range

my car also has an lsd 6 puck spring clutch. good ----

Re: NOOB kit build
 

15 posts too.... To think one noob had it in 7 too :1

Re: NOOB kit build
 

DURKA DURKA -----s durka gihad durka porn durka durka.. nig nog.....