dcivic

-D16y8 block-
I have been doing a lot of research on piecing together a kit and this is what I have come up w/ so far for my first turbo kit. Once I get back from the desert I am going to start buying up some ----. I eventually look to get about 300whp out of this ----.

-T3 T4E 57 trim .63AR
-Manifold .... HF i guess w/ T3 adapter plate
-Tial 38mm WG w/ .45bar spring
-HKS SSQV BOV
-down pipe / dump tube made custom at shop
intercooler ... not sure on whats best bang for the buck for 300hp goal...

-550cc RX7 injectors
-Stock fuel rail
-255lph Fuel Pump from Xenocron

-Crome chipped ecu w/ datalogging,
Moates EPROM emulator and LC-1 WB kit from Xenocron for tuning - 540


-Stealthmode Oil line Kit

-LSD clutch kit

-I got a few newb questions. I have looked around but am not sure still. (flame away)
-What is a dump tube? I hear about one and how it should be located a certain way, but do not know what it is.
-With Crome can you adjust your timing?

I am open to helpful suggestions on parts for my kit. When I get this kit together I plan on picking up another y8 block to build up so I can boost the ---- out of it.

idiot-stick

- It's where excess exhaust gasses go once the wastegate opens

- yeah, else it would be worthless

ifly87

You dont want a missing link with a chipped ecu, you dont want to hide the boost from the map sensor if your ecu is chipped. keep reading noob you have a long way to go.

dcivic

Thanks for the replies guys. So take away the missing link do you think the setup so far is capable of 300hp? I am not sure if I need to upgrade the fuel pump / fuel rail to acheive my goal. Any suggestions on injector size?

hondarex2323

go to dsm 440 or 450cc injecters

dcivic

i was told that the DSMs would be maxed out for 300hp goal... hmmm

moak89

u aiant going to 300 with a stock map sensor. also add up a clutch kit in that list

moak89

btw what internals?

Econo-Box

Your D wont handle 300 dude. you are going to need to think about pistons and rods before you cross that 225 250 HP mark

cberman

yo my setup seems to be very similar to what you want

d16y8
Basic log mani
Real t3/t04e 54 trim with .63 exhaust and stage 3 wheel
tial 38mm wastegate at .8bar
cca fmic
hks ssqv
3 bar map sensor
dsm 450's
xenocron 255lph fuel pump
stealthmode oil lines with stealthmode firewall kit and restrictor
crome
moates burn1 on its way to replace the willem burner
also has arp headstuds

been boosted for over a year with no major problems...some of the stuff i have is kinda baller and can easily be replaced with knockoffs (bov, wg especially)