No intercooler ok temporarly?
Ok, so i was going to modify my dsm smic into a fmic, but its not really worth the time. MOre than half the fins are bent and there is a bunch of sludge/metal shards inside the damn thing.
so would it be ok to run for say, a month w/o an intercooler @4 psi? Of course, my tune is pritty consertive, a pm6 with 450cc injectors on a d16a1. the turbo is a k26, with a log manifold and external w/g. Not sure any of that matters but there you go anyways. Thanks for the help |
Re: No intercooler ok temporarly?
i wouldnt go any higher than 5 psi without an intercooler
|
Re: No intercooler ok temporarly?
Originally Posted by hotrex
i wouldnt go any higher than 5 psi without an intercooler
|
Re: No intercooler ok temporarly?
i ran 15 psi with no ic 8) my ringlands went a few weeks later. i didnt add fuel to account for the extra psi. so that might have been the cause :P
|
Re: No intercooler ok temporarly?
90turboteg i appreciate the offer, but im going to buy a fmic. i was going to modify the dsm smic for fmic, but i couldnt clean all the trash out of it well enough to justfiy me putting it on, just to have my motor blow from the trash i couldnt get out. thanks for the info, HMT owns
sean |
Re: No intercooler ok temporarly?
Why not just wait until you have everything?
|
Re: No intercooler ok temporarly?
how many times are u going to make piping
|
Re: No intercooler ok temporarly?
well i based my pipeing around the fmic i was going to use, so basically its already made for a fmic. all i did was take and put a straight pipe in place. and in order to put in a larger fmic i would just have to cut one of the charge pipes shorter.
why not wait? well i have been waiting for a long ass time just to be held up because i dont have a single part. on top of that, the w/g is set to only 4 psi, and until i buy or build a boost controller im restricted to that. so im not loosing out any way. Sean |
Re: No intercooler ok temporarly?
4 psi is nothing
go ahead and boost |
Re: No intercooler ok temporarly?
yea its nothin in most cars.... but mine happens to weigh 1700 lbs (86 crx hf w/ d16a1 swap) ;D with about 130 hp i may break 13's. I think 4 psi will get that. Imagine 10 psi and 200whp :o
Sean |
All times are GMT -5. The time now is 02:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands