newbie with a turbo question
#1
newbie with a turbo question
Hey there. I've been reading posts on HMT for a while now but have never joined. I figured people here actually seem to know what they are talking about so now I would like some of your wisdom.
I just bought a Garrett T25. I am wondering how i can lower the boost pressure on it. It is off of a 1997 Eclipse GSX. Any help would greatly be appreciated.
~Ryan
I just bought a Garrett T25. I am wondering how i can lower the boost pressure on it. It is off of a 1997 Eclipse GSX. Any help would greatly be appreciated.
~Ryan
#2
Re:newbie with a turbo question
You can either lengthen the wastegate actuater arm, or buy a different actuater. You can lengthen it by bending it, threading the wastegate arm and using a pipe coupler so you can adjust it, or you can add washers inbetween the wastegate mounting bracket and the turbo compressor housing.
I helped a newbie without flaming.... do I get a gold star?
I helped a newbie without flaming.... do I get a gold star?
#3
Re:newbie with a turbo question
Originally Posted by 90zcrex
I helped a newbie without flaming.... do I get a gold star?
#6
Re:newbie with a turbo question
Originally Posted by Stealthmode
If you run 5-6 you WILL be dissapointed. The very minimum to be a member of hmt is 7. And even then that aint all that. 10 is good with good tuning. Anything less.....would be uncivilized.
#8
Re:newbie with a turbo question
Originally Posted by turboDXcoupe
WONT BENIDING IT MAKE THE BOOST HIGHER?
BTW, your caps lock is on.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#10
Re:newbie with a turbo question
Originally Posted by civic si
Originally Posted by Stealthmode
If you run 5-6 you WILL be dissapointed. The very minimum to be a member of hmt is 7. And even then that aint all that. 10 is good with good tuning. Anything less.....would be uncivilized.