newbe, I NEED SOME OF YOUR HELP PLEASE
Im turboing a 89 crx
should i go with FMU or what?? got 450 dsm inj's turbo from a 86? sunbird?? is that a t25?? what sould i do about fuel managemant? woudl the fmu be the easest way to go? i need some oil lines got some cheap? and intercooler, boost gauge. needed! do i need resistors for the 450's?? i took the dpfi and made it mpfi. what elese do i need?? i have the bov and the headers. help please?? thank you, mike ward anyone around INDIANA?? bloomington :y |
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
<_< Reading that post was the equivillent of having a siezure at a midnight rave.
I suggest doing a lot of research. Click the FAQ at the top of this page for one thing. FMU will most likely land you in hot water and burn your set-up to the ground pre-maturely. The best thing for you to do though is to figure out EXACTLY what you are slapping on to your car, and how its going to work. |
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
do a search on Turboedit it might work for you it's for obd0 cars.it's a program that can edit a honda computers fuel and spark management so that it's safe for a turbo.
An fmu and 450cc injectors is going to be so rich the car won't even run. read the faq in forced induction and do some search's on anything you don't understand. |
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
what u do is go to Turbo Projects section and look what people have in their cars. and read the forum please.
|
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
Originally Posted by ward
i have the bov and the headers.
|
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
|
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
I know must of that ---- its just, well where and how do i get the turbo edit
i just need to know the final steps. |
Re: newbe, I NEED SOME OF YOUR HELP PLEASE
Well........Go to PGMFI.org and read the wiki.
You have to download turbo edit onto your computer and get a chipped ecu.Use turbo edit to modiry the rom your cars pc will be reading for fuel and spark tables so that it works for boost burn a new rom onto a chip and then plugg the chip into the ecu and drive the car... Thats a rough overview of how it works.But if you go to pgmfi.org and do a lot of research you will eventually get it. |
All times are GMT -5. The time now is 07:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands