HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   new wastegate for my m43 garrett (https://www.homemadeturbo.com/forced-induction-7/new-wastegate-my-m43-garrett-95634/)

ndnnikk 09-24-2008 11:22 AM

new wastegate for my m43 garrett
 
8 Attachment(s)
Attachment 14290
Attachment 14291
http://i8.photobucket.com/albums/a4/...r/DSC02064.jpg
Attachment 14292
Attachment 14293
Attachment 14294

should i run oil feed ristrictor for this garrett m43 57 trim
Attachment 14295
Attachment 14296
new wastegate
Attachment 14297




marcj 09-24-2008 11:28 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 

Originally Posted by ndnnikk
should i run oil feed ristrictor for this garrett m43 57 trim

unless it's a ball bearing turbo, run an open -3 AN feed..
also why didn't you mount the turbine on the other side? would have used less bends and now the compressor is going to pull heat directly from the radiator :l

ndnnikk 09-24-2008 11:37 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
it bumped radiator fan shroud and i could have but i diddnt like the way the cut would have been on bend, i really wanted it other side, im run piece of charge pipe with filter

EG-prince 09-24-2008 08:37 PM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
Good work on downpipe, gay intercooler

speedjunky01 09-24-2008 09:01 PM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 

Originally Posted by EGgyLShatch
Good work on downpipe, gay intercooler

mine is way gayer! lol


but yea IDK if you like it routed that way the work loks pretty damn good


Originally Posted by marcj
unless it's a ball bearing turbo, run an open -3 AN feed..
also why didn't you mount the turbine on the other side? would have used less bends and now the compressor is going to pull heat directly from the radiator :l

not only that but the hot side charge pipe is soaking up heat off the downpipe, use planty of heatwrap

keep up the nice work on the build

turbocivic6776 09-24-2008 09:18 PM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
i had to run both my pipes the same way i couldnt turn my ---- the other way because of the fan also :-\

the 13th round 09-24-2008 09:21 PM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
ok, why is this in two forums.

obviously a fab related thread.

stop being ------ retarded.

ndnnikk 09-25-2008 12:28 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
because i posted it in the forced induction on acident retard

xternal 09-25-2008 01:05 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
IMO always better to run a restrictor than not. Is that the final placement for the gate?
Might want to try and get it looking after all four exhaust ports..just in the middle would be fine :y

Nice turbo btw

ndnnikk 09-25-2008 01:34 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
wat do you mean by the comment on gate placement? wat do i need to do?

the 13th round 09-25-2008 01:38 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
man, tons of people run those turbos, just make sure you have a good wastegate and spring.

people worry about boost creep because oh how the wg is placed on the #1 runner and not on the collector.

your fine as long as your not planning on pushing crazy boost.

1991civicsi 09-25-2008 01:49 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
Nice. ;) IMHO Id flip the turbo, and put the fan on the other side of the radiator. The criss cross piping was later changed on my setup.

BoostedBSeries 09-25-2008 11:54 AM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 

Originally Posted by 1991civicsi
Nice. ;) IMHO Id flip the turbo, and put the fan on the other side of the radiator. The criss cross piping was later changed on my setup.


flipping the turbo looks retarded and only helps if you dont plan on running an intake. why would you want the turbo 1" from the rad support? the manifold was designed to have the turbo mounted the way it is.

90dx 09-25-2008 03:01 PM

Re: just fabbed a 3 inch down pipe for my m43 garrett
 
Looks good it doesnt really matter how you mount the turbo as long as it makes boost and nothing melts.

ndnnikk 10-06-2008 09:04 PM

Re: new wastegate for my m43 garrett
 
thanx every one


All times are GMT -5. The time now is 02:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands